Tire orientation
07-01-05, 07:43 PM
#1
Member
Thread Starter
Join Date: Mar 2005
Location: Plano, TX
Posts: 73
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Tire orientation
I just replaced the combination street/trail tires that came standard on my comfort bike with a set of pure street tires (Serfas Drifter Dual Sport - https://www.serfas.com/tires/CTR-26.html ). It was only after I installed the tires and put the wheels back on the bike that I noticed the orange label with the manufacturer name and tire model was on the left side of the rear tire and on the right side of the front tire. This got me thinking that maybe the tires are supposed to go on with a certain orientation with the label on the same side of the front and rear. I carefully looked all around both sides of the tires and couldn't find any type of directional arrow indicating tire rotation direction. Also, the tread on these tires is perfectly symmetrical--looks the same from either direction. Given this, is it perfectly fine to leave the tires as they are, or do all tires have a certain orientation and should be mounted accordingly?
07-01-05, 07:58 PM
#3
Spoked to Death
Join Date: Jul 2004
Location: Boulder, CO
Posts: 1,335
Bikes: Salsa La Cruz w/ Alfine 8, Specialized Fuse Pro 27.5+, Surly 1x1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Some tires have directional tread (like my Specialized Hemispheres), some do not. Yours do not, so it doesn't matter.
If they DO have directional tread, it will be set up so that the printed label can be read from the right side of the bike, and anal retentive people set their tires up like that all the time, with the printed label on the right side, aligned with the valve stem, but there is no reason for that other than vanity, and the slight convenience of having the pressure rating next to the valve for ease of reading.
peace,
sam
If they DO have directional tread, it will be set up so that the printed label can be read from the right side of the bike, and anal retentive people set their tires up like that all the time, with the printed label on the right side, aligned with the valve stem, but there is no reason for that other than vanity, and the slight convenience of having the pressure rating next to the valve for ease of reading.
peace,
sam
07-01-05, 08:26 PM
#4
Member
Join Date: Jan 2004
Location: atop Lookout Mt., Cloudland, Georgia
Posts: 47
Bikes: Treks 1000, 7600, 700
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Every one to his own, But my "need to know", out weights style. I like my labels on the same side, and most important to me is having the printed "tire pressure" centered at the valve stem. But that's just me.
07-01-05, 08:59 PM
#5
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 643 Times
in
364 Posts
Originally Posted by sydney
Don't mess with em unless you are an AR that has to have the label on the right side and aligned with the valve stem.
07-01-05, 09:05 PM
#6
Macaws Rock!
Join Date: May 2005
Location: San Francisco, CA
Posts: 1,513
Bikes: 2005 Soma Doublecross
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
The reason I align the label with the valve stem has nothing to do with vanity. It helps you find the cause of a puncture when you get a flat. Find it on the tube, then look at the same area on the tire.
__________________
---
San Francisco, California
---
San Francisco, California
07-02-05, 11:10 AM
#7
Spoked to Death
Join Date: Jul 2004
Location: Boulder, CO
Posts: 1,335
Bikes: Salsa La Cruz w/ Alfine 8, Specialized Fuse Pro 27.5+, Surly 1x1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Don't mess with me, you are all totally vain. You just don't want the mechanic giving you that look they give people when it is obvious you've been working on your own bike. 
peace,
sam
*runs and hides his bikes, all of which have the label carefully aligned with the valve stem, and oriented such that the label on the hub and rim are readable from the right side of the bike*
peace,
sam
*runs and hides his bikes, all of which have the label carefully aligned with the valve stem, and oriented such that the label on the hub and rim are readable from the right side of the bike*
07-02-05, 08:15 PM
#8
Junior Member
Join Date: Jul 2005
Location: Blacksburg, VA
Posts: 17
Bikes: Low-end Cannondale Road Bike (my pride & joy)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by michaelnel
The reason I align the label with the valve stem has nothing to do with vanity. It helps you find the cause of a puncture when you get a flat. Find it on the tube, then look at the same area on the tire.
It also does look cooler. But don't judge me on this...I have dental floss and trash-bag, twist-ties holding on my bike computer
(I don't like zip-ties because they're hard to remove. Dental floss may be a bit ghetto, but it actually looks just tight and clean as zip-ties. I'm applying my artistic license to my bike. As for the trash-bag ties...um...I have no excuse.)BTW, this is my first posting ever on BikeForums. I hope I'm not being too intrusive.
-W
07-02-05, 08:32 PM
#9
Senior Member
Join Date: Jan 2005
Location: Illinois
Posts: 1,015
Bikes: 2004 Raliegh Retro Glide 7(green of course), 2005 Stingray Pea Picker 2005 Specialized Hardrock 2014 Trek Crossfit
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by michaelnel
The reason I align the label with the valve stem has nothing to do with vanity. It helps you find the cause of a puncture when you get a flat. Find it on the tube, then look at the same area on the tire.
As a mechanic, I line up the valve with the label. Its easier to locate the cause of your flat!
If they are mountain/dirt tires, always have the label on the drive side.
__________________
We're gonna have the hap, hap, happiest Christmas since Bing Crosby tap-danced with Danny ****ing Kaye.~Clark Griswold
We're gonna have the hap, hap, happiest Christmas since Bing Crosby tap-danced with Danny ****ing Kaye.~Clark Griswold
07-02-05, 08:43 PM
#10
370H-SSV-0773H
Join Date: May 2005
Location: Penniless Park, Fla.
Posts: 2,750
Bikes: Merlin Fortius, Specialized Crossroads & Rockhopper, Serotta Fierte, Pedal Force RS2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
- most kind of the tioga folks to emboss 'Drive->' on the sidewalls of their City Slickers
(i noticed *after* i had mounted them 'backwards')
signed,
the dsylexic wrench
(i noticed *after* i had mounted them 'backwards')
signed,
the dsylexic wrench
07-03-05, 12:39 AM
#11
Pwnerer
It really doesn't matter to me where my labels line up, and it doesn't bother me that some people make a fetish out of it. At the very least it means they're paying enough attention to notice when a tire does have a directional tread and orient it correctly. They're also the type to bring in their bike for repairs pristinely clean...detailed with their own toothbrush. The minty smell is a dead giveaway.
