****ing issues
#1
Senior Member
Thread Starter
Join Date: Nov 2004
Location: Copenhagen, Denmark
Posts: 236
Bikes: Handbuild steelframe racer shimano 105/ultegra mix, Kildemoes alu frame hybrid
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
****ing issues
Hi experts!
I have the following setup: Shimano 600 STI 8-speed, 105 9 speed front and rear derailler, 105 53/39 crankset, 8 speed HG90 12-21 cassette, chain wipperman connex 808 (chain and rear cassette new!, cables and crankset 4 months old).
Problem: I´m having problems shifting down from 15 to 14 behind in the 39 ring not in the 53, no other shift issues. I have tried adjusting the cable, but just another 1/4 turn and the upshifting goes, I have also tried cleaning and the STI shifters with WD40 and reaaplying some spary oil - to no awail.
Any good suggestions will be welcomed.
I have the following setup: Shimano 600 STI 8-speed, 105 9 speed front and rear derailler, 105 53/39 crankset, 8 speed HG90 12-21 cassette, chain wipperman connex 808 (chain and rear cassette new!, cables and crankset 4 months old).
Problem: I´m having problems shifting down from 15 to 14 behind in the 39 ring not in the 53, no other shift issues. I have tried adjusting the cable, but just another 1/4 turn and the upshifting goes, I have also tried cleaning and the STI shifters with WD40 and reaaplying some spary oil - to no awail.
Any good suggestions will be welcomed.
#2
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 643 Times
in
364 Posts
Whenever I have a shifting problem that doesn't respond to normal tuneing, the first thing that I do is to check to see that everything is in the normal default position. In this case, I'd check the derailleur hanger alignment.