Advertise on Bikeforums.net



User Tag List

Results 1 to 5 of 5
  1. #1
    Senior Member warrenroadie's Avatar
    Join Date
    Sep 2004
    Location
    Warrenton, Georgia
    My Bikes
    2002 Trek 5200 DA components, 2002 Trek 2300 Ultegra components
    Posts
    75
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Mavic Ksyriums SSC

    Just purchased a almost new 2003 Mavic Ksyrium SSC wheelset. There was a spacer on freehub when I received wheelset. I assumed this was for 9 speed cassette. When I installed the 9 speed cassette on hub I cannot get it to tighten properly. The cassette has some movement on hub and this is not normal for a proper fit. The spacer is about half the width of a normal 9 speed spacer(the one between the cogs)
    Do I have the wrong spacer? Please advise.

  2. #2
    Member
    Join Date
    May 2005
    Posts
    28
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    You mentioned the wheel came with a spacer, that means it is a m10 wheel (will work with both Shimano and Campy cassttes) The spacer is used for Shimano cassette bodies only (8,9or 10 speed). If you have a Campy cassette, remove the spacer and you are good to go!

    Just a side note: If you were sold a E10 wheel (with a spacer thrown in by mistake) it will ONLY work with Campy goodies not the "big S"

  3. #3
    Senior Member warrenroadie's Avatar
    Join Date
    Sep 2004
    Location
    Warrenton, Georgia
    My Bikes
    2002 Trek 5200 DA components, 2002 Trek 2300 Ultegra components
    Posts
    75
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    I assume it is a M10 wheel, because I installed Shimano 9 speed cassette on hub.
    Will a Shimano cassette fit onto a Campy hub?
    Can I find the M10 I.D. stamped on hub?

  4. #4
    Humble Member
    Join Date
    Jan 2005
    Location
    Phoenix, AZ
    Posts
    34
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    I've had the same problem on the SSC-SL only with a Dura-Ace 9-Speed cassette using the original Dura-Ace lockring. It seemed pretty "thin" and I could not achieve a good "crush" on the cassette's cluster. I used a TIOGA brand aluminum lockring I scored on Ebay and it worked much better. You could also add a(nother) thin round shim to make up the difference...

  5. #5
    Senior Member warrenroadie's Avatar
    Join Date
    Sep 2004
    Location
    Warrenton, Georgia
    My Bikes
    2002 Trek 5200 DA components, 2002 Trek 2300 Ultegra components
    Posts
    75
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    I've taken a spacer ring from my spare cassette and can now get the cassette tight on the hub. I can't believe no one else has not had this problem. It is a standard setup Mavic SSC Sl with a Durace cassette.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •