Bike Forums

Bike Forums (https://www.bikeforums.net/forum.php)
-   Bicycle Mechanics (https://www.bikeforums.net/bicycle-mechanics/)
-   -   Centaur Soloist cable changes (https://www.bikeforums.net/bicycle-mechanics/153760-centaur-soloist-cable-changes.html)

DocRay 11-15-05 03:15 PM

Centaur Soloist cable changes
 
It's time to re-cable my Cervelo Soloist again, this time, I'm doing it myself.

For the Campy experts: does it matter if I replace the 4.5mm cable with 5mm cable? It's easier to source. I know I will need new ferrules.

How can I adjust the front deraileur once it's cabled up? There are no barrel adjusters. Is it possible to retrofit barrel adjusters on the soloists downtube? Seems possible??

Anyone been there and done that would be helpful...thx.

sydney 11-15-05 04:09 PM

The .5mm isn't a deal killer. There are plenty of universal cables. Some may have larger heads and need to be dressed down a bit to fit campy shifters. Dont try forcing one into the shifter if it's tight. www.parktool.com repair section has the drill on FD adjustment.Obviously the adjuster is not needed with campy as it apparentrly had been setup and functioning without one. Just pull the slack out of the cable when seting it up. if the Cervelo frame cannot acomodate an adjuster, there are inline ones.

DocRay 11-16-05 08:52 AM

I've gone ahead and just done it. Switching to 5mm cable housings is actually slightly better, because the cables are stronger. Turns out the bike doesn't have barrel adjusters for the front deraileur because it doesn't need it. Once high/low is set, just decent tension makes it perfect.
I went with Campy cables for two reasons-I'm not drilling out anything, and they have a pointed end that threads easily and the cable seems to be very high quality.
Another tip is ally cable ends from Cannondale -they are tiny and do the job well.

sydney 11-16-05 09:01 AM


Originally Posted by DocRay
I've gone ahead and just done it. Switching to 5mm cable housings is actually slightly better, because the cables are stronger. Turns out the bike doesn't have barrel adjusters for the front deraileur because it doesn't need it. Once high/low is set, just decent tension makes it perfect.
I went with Campy cables for two reasons-I'm not drilling out anything, and they have a pointed end that threads easily and the cable seems to be very high quality.
Another tip is ally cable ends from Cannondale -they are tiny and do the job well.

You don't have to 'drill out' anything. if the head on a replacement cable is a bit big,you take material off the head of the cable end.I mentioned the business about not needing an adjuster....But whatever...Ain't just grabbin the seat of your pants and just doing it great?

DocRay 11-16-05 11:21 AM


Originally Posted by sydney
...Ain't just grabbin the seat of your pants and just doing it great?

yeah, when it works... otherwise I feel like a goof when I bring my bike to the mechanic, like trying to cut my own hair ...




http://tinypic.com/297b6t

sydney 11-16-05 05:06 PM

Yeah, but consider all the great greeen shag smoking material you can buy with the savings. with the savings.


All times are GMT -6. The time now is 09:31 AM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.