Gardin frame seatpost diameter
01-04-06, 07:46 PM
#1
Newbie
Thread Starter
Join Date: Jan 2006
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Gardin frame seatpost diameter
Hi, I have a Gardin road bike made around 1990 and I want to change the seatpost but I am not sure if the diameter is 27mm or 27.2mm. Does anybody know?
01-05-06, 07:57 PM
#2
Senior Member
Join Date: Dec 2005
Location: Atlanta, GA
Posts: 1,223
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
If you have a seatpost currently installed, the diameter should be stamped on it somewhere. Usually it's located below the minimum insertion mark.
If you don't have a seatpost that fits the frame, you'll have to check with your local bike shops to have the inside diameter of the seat tube measured. Most shops are equipped with tools to measure this accurately.
If you don't have a seatpost that fits the frame, you'll have to check with your local bike shops to have the inside diameter of the seat tube measured. Most shops are equipped with tools to measure this accurately.
