Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

Front brake chatter...

Search
Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

Front brake chatter...

Thread Tools
 
Search this Thread
 
Old 02-23-06, 09:13 AM
  #1  
Senior Member
Thread Starter
 
Join Date: Dec 2005
Location: Southeast USA
Posts: 2,130
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time in 1 Post
Front brake chatter...

Any idea why the front brake on my mtn bike chatters? When I apply the brake the whole front fork shakes. No problem with the rear. This is NOT a disk brake. Brake pads look fine.
Miller2 is offline  
Old 02-23-06, 09:23 AM
  #2  
Senior Member
 
Join Date: Oct 2005
Posts: 5,820
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 383 Post(s)
Liked 133 Times in 91 Posts
Check your headset to make sure its not loose. Then be sure your pads are "toed in", that the front of the pad is slightly closer to the rim than the rear of the pad is. Also, sandpaper the pads and rim to make sure they are clean.
San Rensho is offline  
Old 02-23-06, 10:06 AM
  #3  
Mad bike riding scientist
 
cyccommute's Avatar
 
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,362

Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones

Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6219 Post(s)
Liked 4,217 Times in 2,364 Posts
Originally Posted by San Rensho
Check your headset to make sure its not loose. Then be sure your pads are "toed in", that the front of the pad is slightly closer to the rim than the rear of the pad is. Also, sandpaper the pads and rim to make sure they are clean.
I too would suspect a loose headset but your fork legs could be sloppy too. If you have a lot of miles on the bike, your fork bushings may need replaced.

Does this happen all the time or just at certain places on the rim? If it is a pulsing kind of feeling, it could be a blipped rim.

Also check to see if the brake caliper bolts are tight...not too tight, just snug.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!



cyccommute is offline  
Old 02-23-06, 12:47 PM
  #4  
Senior Member
Thread Starter
 
Join Date: Dec 2005
Location: Southeast USA
Posts: 2,130
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time in 1 Post
Originally Posted by cyccommute
I too would suspect a loose headset but your fork legs could be sloppy too. If you have a lot of miles on the bike, your fork bushings may need replaced.

Does this happen all the time or just at certain places on the rim? If it is a pulsing kind of feeling, it could be a blipped rim.

Also check to see if the brake caliper bolts are tight...not too tight, just snug.
Not enough miles on the bike for the bushings to be shot. Happens all the time...all the way around the rim. I'll try what you guys suggest.
Miller2 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.