stripped campy chorus bb lockring
#1
GranitCurbVia53x11Sprint
Thread Starter
Join Date: Oct 2004
Location: rocky beautiful coast of Maine
Posts: 191
Bikes: Cervelo R2.5 Campy Record 10, Dean Ti 'Cross, Merlin Agilis (road), Litespeed Obed (mb), Basso (ss/fixie)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
stripped campy chorus bb lockring
I got a used Merlin Agilis Ti frame with Campy chorus crank/BB installled. Crank creeked when standing so I put a 1/8 turn on the BB lockring (non-drive side) using genuine Campy tool and creek almost all gone.
Tried to tighten again and STRIPPED all teeth of inner lockring. I'd like to remove bottom bracket and replace, would like to replace with compact (non Campy) so my concern is removal, not necessarily saving.
1) Don't have blow-tourch would this work should I bring to shop?
2) If I remove crank witll other side loosen for removal?
Tried to tighten again and STRIPPED all teeth of inner lockring. I'd like to remove bottom bracket and replace, would like to replace with compact (non Campy) so my concern is removal, not necessarily saving.
1) Don't have blow-tourch would this work should I bring to shop?
2) If I remove crank witll other side loosen for removal?