restricted speed?
#1
Junior Member
Thread Starter
Join Date: Apr 2006
Location: santa cruise
Posts: 5
Bikes: centurion ironman dave scott
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
restricted speed?
okay, i'm terrible explaining things, especially bikes since i'm not an expert about mechanical shtuff so i'll try my best...please bear with me!
when i'm riding on a flat road or at a moderate speed there's some resistance to the pedals which actually makes me be able to pedal but whenever i'm pedaling fast or going downhill, at some point my pedals just kind of top out / stop :working: (??) and although i may pedal, it feels like i'm just spinning them but i can't go any faster. the feeling is almost similar to being in a low gear on a flat surface. for example, the other day i was going pretty fast downhill and when the road flattened out the speed from going downhill was still with me but my pedalling had no effect, so i basically had to wait till i'd lost speed from the hill to be able to start "really" pedalling again and at this point i felt like i was going really slow
is this normal? how can i change this? it's really frustrating!!
thanks!!
when i'm riding on a flat road or at a moderate speed there's some resistance to the pedals which actually makes me be able to pedal but whenever i'm pedaling fast or going downhill, at some point my pedals just kind of top out / stop :working: (??) and although i may pedal, it feels like i'm just spinning them but i can't go any faster. the feeling is almost similar to being in a low gear on a flat surface. for example, the other day i was going pretty fast downhill and when the road flattened out the speed from going downhill was still with me but my pedalling had no effect, so i basically had to wait till i'd lost speed from the hill to be able to start "really" pedalling again and at this point i felt like i was going really slow
is this normal? how can i change this? it's really frustrating!!
thanks!!
#2
Southern Gentleman
Join Date: Jun 2005
Location: Muscle Shoals, AL
Posts: 148
Bikes: 99 Specialized Allez Comp, 03 Cannondale F400, 02 Motobecane Cafe Latte
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
...shift to a higher gear.
If you are saying this is happening while you are in your highest gear (big ring in the front, small cog in the back), then the only solution is to get a bigger ring in front or a different cassette in the rear with a smaller cog. Or you can simply just live with it.
If you are saying this is happening while you are in your highest gear (big ring in the front, small cog in the back), then the only solution is to get a bigger ring in front or a different cassette in the rear with a smaller cog. Or you can simply just live with it.
#4
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,095 Times
in
741 Posts
Is your bike an MTB? Most of these have lower top gears than road bikes and you will "spin out" at fairly low speeds unless you are capable of a very fast cadence.
#5
Barbieri Telefonico
Join Date: Aug 2005
Location: Albuquerque, New Mexico
Posts: 3,522
Bikes: Crappy but operational secondhand Motobecane Messenger
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
my money is in a mtb gearing
__________________
Giving Haircuts Over The Phone
Giving Haircuts Over The Phone
#6
Senior Member
Join Date: Mar 2006
Location: Eastern Ohio
Posts: 90
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
It sounds like the bike is moving fast enough that you can't spin the pedals fast enough to keep up. A higher top gear would help with that. One thing to keep in mind is that if you almost never go that fast, you might be better off just coasting and then you can keep all of your current gears. One other suggestion is to look at toe clips or clipless pedals, if you don't have them. You can spin a LOT faster if your feet are connected to the pedals.
God bless!
Wayne J.
God bless!
Wayne J.
#7
Senior Member
Join Date: Feb 2005
Location: Oklahoma
Posts: 9,438
Bikes: Trek 5500, Colnago C-50
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 7 Times
in
6 Posts
Just turn the pedals faster or coast and enjoy the ride. Changing the gearing will likely cause problems in other situations. What you have described is known as "spinning out", as Hillrider said.
Al
Al