Campy bottom bracket question
#1
META
Thread Starter
Join Date: Aug 2005
Location: Madison, WI
Posts: 945
Bikes: Gary Fisher Aquila (retired), Specialized Allez Sport (in parts), Cannondale R500, HP Velotechnic Street Machine, Dented Blue Fixed Gear (retired), Seven Tsunami SSFG, Specialized Stumpjumper Comp Hardtail (alloy version)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 3 Times
in
1 Post
Campy bottom bracket question
Pretty simple. It's coming off of a vintage touring bike. Everything (post washing) is in lovely condition. I'm just kinda confused about how many bearings I SHOULD have.
Note: I made damn sure I didn't lose any down the sink. I'm not that stupid.
Current bearing count is 21.
any thoughts?
Note: I made damn sure I didn't lose any down the sink. I'm not that stupid.
Current bearing count is 21.
any thoughts?
#2
Remember Wool Shorts?
Join Date: Aug 2005
Location: Irvine
Posts: 502
Bikes: Gios Torino, Lemond Zurich, Giant
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I used to remember all the bearings in campys bb and hubs. The general rule of thumb is to fill it all up, then remove one.
#3
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
It sounds like you lost one so look inside the bb shell or cups. All of the loose ball cup-and-cone bb's I've ever seen used nine 1/4" balls per side with retainers and eleven 1/4" balls per side with no retainers.