Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

Lacing wheels

Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

Lacing wheels

Old 06-26-06, 06:17 PM
  #1  
Member
Thread Starter
 
Join Date: Sep 2005
Posts: 40
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Lacing wheels

Is this possible on the personal level? I could save 60 bucks on installing new singletracks if I could do this, I guess I should say is there a technique or is it something specail you have to learn?
motocrossy is offline  
Old 06-26-06, 06:47 PM
  #2  
Taking "s" outta "Fast"
 
AfterThisNap's Avatar
 
Join Date: Dec 2005
Location: Zoo York City
Posts: 1,989
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
It's super easy. Read this article in it's entirety first:

https://sheldonbrown.com/wheelbuild.html

and then give it a twirl. It's gonna take you about an hour+ on your first go, but you'll get it. Wheel building isn't black magic, but it does requre a little attention.
AfterThisNap is offline  
Old 06-26-06, 07:13 PM
  #3  
Senior Member
 
Retro Grouch's Avatar
 
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225

Bikes: Catrike 559 I own some others but they don't get ridden very much.

Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 642 Times in 363 Posts
Everybody who does it, somewhere along the line, had to do their first one. Don't get in too much of a hurry when you get to the tensioning and trueing stage and you'll be fine. Uh - an hour on your first go isn't realistic. Three to four hours might be closer to right.
Retro Grouch is offline  
Old 06-27-06, 06:27 AM
  #4  
Making a kilometer blurry
 
waterrockets's Avatar
 
Join Date: May 2006
Location: Austin (near TX)
Posts: 26,170

Bikes: rkwaki's porn collection

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 37 Post(s)
Liked 91 Times in 38 Posts
Originally Posted by Retro Grouch
Everybody who does it, somewhere along the line, had to do their first one. Don't get in too much of a hurry when you get to the tensioning and trueing stage and you'll be fine. Uh - an hour on your first go isn't realistic. Three to four hours might be closer to right.
My first was 1.5 hours. Back then, Sheldon's site didn't exist, and I had no books on wheelbuilding. I did it by looking at a completed wheel for reference.

I'm pretty mechanically inclined, but I think that most people could pull this off in under 2 hours. The time sure goes fast at any rate.
waterrockets is offline  
Old 06-27-06, 08:36 AM
  #5  
Senior Member
 
Join Date: Feb 2005
Location: Oklahoma
Posts: 9,438

Bikes: Trek 5500, Colnago C-50

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 7 Times in 6 Posts
Lacing wheels is the easiest part of wheel building. Radial truing, dishing, tensioning, pre-stressing, and lateral truing require more skills and patience, but anyone can do it with the right tools.

Al
Al1943 is offline  
Old 06-27-06, 09:01 AM
  #6  
Full Member
 
toolboy's Avatar
 
Join Date: Mar 2006
Location: Regina, Saskatchewan, Canada
Posts: 324

Bikes: Steve Bauer Whirlwind, Nishiki International, Rocky Mountain Element 30 1984 Cinelli Super Corsa w/Campy 50th, Surly LHT.

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Building wheels and seeing them in service several years later with no broken spokes and still perfectly true is one of the most rewarding bike repair experiences I have had. My first wheel took and entire day to complete and was done with the constant assistance of Jobst Brandt's book. Guess I'm a slow learner - I usually spend about 2 hours on a wheel build now from start to finish - not fast enough for a bike shop but then I'm in no hurry. I did invest in the Park tension meter but a good ear and the fingernail "ping" method has proven to be quite accurate for me.
toolboy is offline  
Old 06-27-06, 09:08 AM
  #7  
Remember Wool Shorts?
 
astrodaimler's Avatar
 
Join Date: Aug 2005
Location: Irvine
Posts: 502

Bikes: Gios Torino, Lemond Zurich, Giant

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by Al1943
Lacing wheels is the easiest part of wheel building. Radial truing, dishing, tensioning, pre-stressing, and lateral truing require more skills and patience, but anyone can do it with the right tools.

Al
For me, the hard part was that formula to figure out spoke lengths. I think its the sqaure root of a-squared plus b-squared plus c-squared minus rim height divided by 2. Whew! Umm, the answer is ... e) both A and C are correct... or the train in NYC will arrive in Barstow before the train leaving LA.

Anyway, lacing is the easy part but understanding the science of it all is really cool. Pick up Jobst Brandts' book. Really cool about learning the difference of 2x lacing and 3x lacing, radial lacing, lateral loads, vertical loads, wheel collapse and all that cool stuff.

Oh, yeah, a Park TS-2 will make things easier too. Self-centering. Make sure you lean on the new laced wheels from the top and also with the hubs on the ground, lean on 3'oclock and 9'oclock positions, flip and repeat, then retrue. That will give you good pretensioned strength.
astrodaimler is offline  
Old 06-27-06, 10:44 AM
  #8  
Senior Member
 
Speedo's Avatar
 
Join Date: Jun 2006
Location: Boston Area
Posts: 1,998

Bikes: Univega Gran Turismo, Guerciotti, Bridgestone MB2, Bike Friday New World Tourist, Serotta Ti

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Another vote for Jobst Brandt's book AND for that Park TS-2 truing stand! The book has algorithms for spoke length calculation. Don't let astrodaimler frighten you about that! There is also a spoke length calculator on the DT website.

The satisfaction of money saved pales in comparison to the satisfaction of having your own hand built wheels.

Speedo
Speedo is offline  
Old 06-28-06, 12:04 AM
  #9  
I'm made of earth!
 
becnal's Avatar
 
Join Date: Nov 2004
Location: Frankfurt, Germany
Posts: 2,025

Bikes: KTM Macina 5 e-bike, Babboe Curve-E cargobike, Raleigh Aspen touring/off-road hybrid.

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Liked 0 Times in 0 Posts
Well, to figure out spoke length, get the rim and hub first. Then use the Spoke Calc on Sheldon's site and perhaps a caliper. No need to do math.
becnal is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.