Differences: QR20 and 20mm thru axle hubs
#1
Member
Thread Starter
Join Date: Aug 2002
Location: Western NC
Posts: 36
Bikes: Custom 01 DB XSL Pro, 99 Raleigh R700
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Differences: QR20 and 20mm thru axle hubs
Ok, I'm having a bit of trouble here figure out the differences between the QR20 hubs and the 20mm thru axle hubs. Are the hubs the same, but use a different axle? As long as a person has the axle, will it matter what hub is used? I have searched online quite a bit, and I can't seem to find very much information on these. Any insight would be greatly appreciated!
#2
Gravity Is Yer Friend
Join Date: May 2002
Location: "Over the Hill" and going down fast in the 805.
Posts: 2,961
Bikes: Scott Gambler, Scott Ransom, Kona Bear, Bianchi 928 Carbon/Chorus, C'Dale Rize4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
If a hub is designed for QR it will not accept a through axcel but a hub for a through axcel can be used with a QR. The QR is like any other qr but with a 20mm axcel. the Through axcel bolts on. If you use a 20mmQR on a hub designed for a through axcel you may have to buy an adaptor to get the qr to work. Marzocchi sells one.
#3
Member
Thread Starter
Join Date: Aug 2002
Location: Western NC
Posts: 36
Bikes: Custom 01 DB XSL Pro, 99 Raleigh R700
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Ok.. I have a dude that has a QR20 fork. I am to build him a wheel.. I was originally going with the Ritchey 20mm thru axle hub, but now I'm thinking it may be better to try to find a QR20 specific hub, right?
#4
Wood Licker
Join Date: Apr 2002
Location: Whistler,BC
Posts: 16,966
Bikes: Trek Fuel EX 8 27.5 +, 2002 Transition Dirtbag, Kona Roast 2002
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 23 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
As far as I know you can use 20mm hubs in qr20 forks. At least with marzocchi ones. But I forget what you have to do to get it to work
#5
Gravity Is Yer Friend
Join Date: May 2002
Location: "Over the Hill" and going down fast in the 805.
Posts: 2,961
Bikes: Scott Gambler, Scott Ransom, Kona Bear, Bianchi 928 Carbon/Chorus, C'Dale Rize4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
As I said. You can use a 20mm through axcel hub on a qr. You will just have to get the adaptor. That way if he ever gets a fork that uses a through axcel he can use the same hub.
Now, on some 20mm qr hubs you can remove the inner portion to make it work on a through axcel but I would not recomend it.
What fork will it be going on?
Now, on some 20mm qr hubs you can remove the inner portion to make it work on a through axcel but I would not recomend it.
What fork will it be going on?