Advertise on Bikeforums.net



User Tag List

Results 1 to 1 of 1
  1. #1
    www.theheadbadge.com cudak888's Avatar
    Join Date
    Sep 2005
    Location
    Southern Florida
    My Bikes
    http://www.theheadbadge.com
    Posts
    22,729
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Been in search of some Shimano Hyperglide parts...

    Have had little luck with the LBaS's , so I thought I'd give you fellows a shot at this:

    In rather urgent need of:

    *12t Shimano Hyperglide cog for 8-speed cassette (3mm spacing), second from outer cog (the one with the 3mm spacer built in, and a small depression for the 11t compact cog to fit in).
    *Two 7-speed cassette spacers

    (P.S.: Anyone here remember the Gary Fisher/Peugeot shifting nightmares, and the SR/Suntour cassette that solved the problem? Turns out the secret is a pair of 7-speed spacers placed next to the two largest cogs in the cassette.)

    While we're on the subject, I could also use these other non-vintage parts for my POS '99 Gary Fisher Tassajara beater (same bike I need the 12t cog and spacers for):

    *Shimano MTB crankset or one-piece triple chainrings (4-bolt), the small-diameter "IG Chain Only" type. Could use the left-hand crankarm too - someone stripped the pedal threads on the original, and my replacement clears the frame by less then 2mm - enough that it scrapes the frame slightly while under load.
    *Extremely tall 27.2 seatpost - 410mm minimum, a 460mm would be fantastic.
    *Aluminum North Road-bend handlebars - will also consider silver-painted steel.

    Take care,

    -Kurt
    Last edited by cudak888; 09-08-06 at 06:50 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •