Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

tuning an old "sport tourer"

Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

tuning an old "sport tourer"

Old 10-02-06, 10:54 AM
  #1  
Senior Member
Thread Starter
 
Join Date: Aug 2006
Location: Seattle
Posts: 115
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
tuning an old "sport tourer"

Hi all,

Yesterday I scored an old Shogun late 80s road bike off craigslist. It was stored in a garage, so it's in amazing condition for its age, quite rideable as-is, and the frame is made of Tange 900 cromoly. I bought it b/c I wanted a bike with: 1) enough clearance for fenders, to ride around in the wet Seattle fall/winter, 2) more stability than an old, fast 'racing'-type Fuji League I have.

Being one of those old "sport tourers", it's a 12-speed with 27 inch aluminum (not steel) wheels. Heavier than the Fuji, but not ridiculously so. I'm not hoping to win any speed races--but having said that, are there any easy tuning tips or cheap upgrades I could do to get as much speed as I can out of it?

I've already checked that wheels are fairly true and not rubbing brake pads, and oiled the chain and derailleurs.

Thanks everyone who's replied to my occasional questions! BF is a pretty amazing resource for beginners like me.
hackybiker is offline  
Old 10-02-06, 12:08 PM
  #2  
Senior Member
 
Join Date: Jan 2006
Posts: 248
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times in 2 Posts
If it was mine, i'd do some modifications to make it more useful/personalised. Rear rack perhaps, other things befitting a light weight touring bike. I wouldn't be worried about speed, I'm sure it's plenty fast enough as it is.
highlyselassie is offline  
Old 10-02-06, 12:32 PM
  #3  
The Improbable Bulk
 
Little Darwin's Avatar
 
Join Date: Jul 2005
Location: Wilkes-Barre, PA
Posts: 8,401

Bikes: Many

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 7 Times in 7 Posts
Check and/or grease all bearings.

You may be able to find some slightly narrower tires. What size is it running? My guess is 1 1/4, you can go down to 1 1/8, and depending on the rims, maybe even 1"... If they are hooked rims, you may be able to go with higher pressure, if not, stay below about 70.

Depending on where in Seattle you are riding, if you are climbing hills anything to save weight would be helpful... whether on the bike or the rider.

Not much else you can do.
__________________
Slow Ride Cyclists of NEPA

People do not seem to realize that their opinion of the world is also a confession of character.
- Ralph Waldo Emerson
Little Darwin is offline  
Old 10-02-06, 12:35 PM
  #4  
Death fork? Naaaah!!
 
top506's Avatar
 
Join Date: Nov 2005
Location: The other Maine, north of RT 2
Posts: 5,313

Bikes: Seriously downsizing.

Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 555 Post(s)
Liked 615 Times in 275 Posts
I'm building up a similar Shogun for my daughter. The first thing I'd do is replace the brake levers with a set of low-end 'Aero' levers (like the Tektro R100/200) and the pads with Koolstop Continentials.
After that, it's just preference. I'd go 7-speed myself, with either barcons or Take-Offs. And if you go 7 speed bifters are an option as well.
Top
top506 is offline  
Old 10-02-06, 11:02 PM
  #5  
Senior Member
Thread Starter
 
Join Date: Aug 2006
Location: Seattle
Posts: 115
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
highlyselassie: yes, I do plan to add a rear rack. It doesn't have mounts on the seatstays, oddly, so I think I need p-clips. I wonder how much weight the 27 inch tires can handle at 70 psi...

Darwin: thanks for the tips. Not sure if they are hooked rims. One is a Weinmann 215, the other an unspecified Araya. (The etching on the Araya says "27 x 1 1/4 w/o Japan." I wonder what w/o means.) Guess I should deflate the tires and check the rims at some point. They're running at 80-ish right now.

top506: those Aero levers sound interesting; I'd been wondering if there are levers with better mechanical advantage. I'll definitely keep my eye out for a pair. I'm not crazy about the idea of bifters (brifters?). Sounds like more stuff that can potentially break, and I'm on a tight budget.
hackybiker is offline  
Old 10-02-06, 11:26 PM
  #6  
100% USDA certified
 
the beef's Avatar
 
Join Date: Feb 2006
Location: Seattle -> NYC
Posts: 4,023
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 6 Times in 2 Posts
Brifters aren't breakable, but a pair of those will cost more than the whole bike. So yeah.

The Tektros are niiiice. I run a pair on my old 80s Schwinn Super Sport. They're comfortable as heck, and shaped just like Campy levers except of course without the shift levers. The hoods are grippy. And they look good as well. Not to mention they brake a lot smoother than the old Dia-Compes I had on there.
the beef is offline  
Old 10-03-06, 07:33 AM
  #7  
Senior Member
 
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656

Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!

Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,095 Times in 741 Posts
One possibility is to substitute 700c wheels for the current 27". You will have to be sure the brake pads will adjust the required 4 mm lower to make this change but it opens up an entire new world if it works. It will also provide even better clearance for fenders. I was able to do this on an early '80's Trek that originally came with 27" wheels.

Since the bike is currently a 6-speed, I expect the rear dropouts are 126 mm so you could fit a 7-speed freehub wheel and use cassettes. 7-speed indexing downtube shifters are still available and that would be a low-cost upgrade. You could even cold set or flex it to take a 130 mm 8/9/10-speed hub.

Another worthwhile addition is to spray the interior of the frame, stays and fork blades with Frame Saver or Amsoil HDMP for rust protection. This should be manditory in Seattle.

Of course, overhaul and relube all hub, headset and bottom bracket bearings before riding it at all.

Modernity awaits!
HillRider is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.