Grease and Lubricants - when/where/what?
#1
Senior Member
Thread Starter
Join Date: Sep 2006
Posts: 272
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Grease and Lubricants - when/where/what?
Hi,
I would like to know about greases/lubes/etc. How many kinds of grease/lube does one need and which parts get which? I bought some Phil Wood grease today, and because I want my touring bike to be cleanish, I'm going to use White Lighting as well (I use that only for the drivetrain right?). I'll also get some Blue Loctite as per a suggestion from a bikeforum member to use on screws, bolts, etc. I'll get a cleaner too.
1) Do I need anything else?
2) What is Phil Wood tenacious oil used for?
3) When installing a cassette on hub, do you grease the hub? (for moisture protection?) If so, should I use the phil wood grease for this?
4) When installing your seatpost, do you grease it a little? How about the fork? (headset and BB will be installed at LBS - they'll grease it for me I'm assuming)
5) For those who use White Lightening, do you just apply it after building the drivetrain, or do you grease/lube certain parts before building?
6) I don't want the bike to get all gunked up with grease and eventually dirt. Is a thin layer of grease enough?
7) Do "dry lubes" work as well as "wet lubes"?
8) How about pedals and crankset? Would I grease/lube the pedal threads, or only use Blue Loctite?
Thanks for the help
I would like to know about greases/lubes/etc. How many kinds of grease/lube does one need and which parts get which? I bought some Phil Wood grease today, and because I want my touring bike to be cleanish, I'm going to use White Lighting as well (I use that only for the drivetrain right?). I'll also get some Blue Loctite as per a suggestion from a bikeforum member to use on screws, bolts, etc. I'll get a cleaner too.
1) Do I need anything else?
2) What is Phil Wood tenacious oil used for?
3) When installing a cassette on hub, do you grease the hub? (for moisture protection?) If so, should I use the phil wood grease for this?
4) When installing your seatpost, do you grease it a little? How about the fork? (headset and BB will be installed at LBS - they'll grease it for me I'm assuming)
5) For those who use White Lightening, do you just apply it after building the drivetrain, or do you grease/lube certain parts before building?
6) I don't want the bike to get all gunked up with grease and eventually dirt. Is a thin layer of grease enough?
7) Do "dry lubes" work as well as "wet lubes"?
8) How about pedals and crankset? Would I grease/lube the pedal threads, or only use Blue Loctite?
Thanks for the help