Halfway through brake swap, and uh oh....
#1
Senior Member
Thread Starter
Join Date: Nov 2005
Posts: 194
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Halfway through brake swap, and uh oh....
Hey all, so I've been switching out the old Shimano cantilevers on my old Schwinn mountain bike with newer v-brakes from my newer Giant mountain bike, which I plan to sell.
I've hooked up the new brake/shifters and the installed the brakes, on the Schwinn, but as I was walking home I realized - I can't put the old Schwinn cantilevers on the Giant, because it has a suspension and no cable hanger on the fork!
Is there any part I can buy that will put a cable hanger on that fork or am I out of luck?
Also, another question about the headset - I pulled off the cable hanger from the Schwinn, which was serving as a spacer I guess. Now the locknut on tab doesn't really have anything to screw down on. Is this a problem and how do I fix that? Is it supposed to be tight on a spacer? I'm not really sure which parts of the headset are supposed to be fixed/screwed down or not... I'm really unfamiliar with headsets! Thanks for all the help you all!
I've hooked up the new brake/shifters and the installed the brakes, on the Schwinn, but as I was walking home I realized - I can't put the old Schwinn cantilevers on the Giant, because it has a suspension and no cable hanger on the fork!
Is there any part I can buy that will put a cable hanger on that fork or am I out of luck?
Also, another question about the headset - I pulled off the cable hanger from the Schwinn, which was serving as a spacer I guess. Now the locknut on tab doesn't really have anything to screw down on. Is this a problem and how do I fix that? Is it supposed to be tight on a spacer? I'm not really sure which parts of the headset are supposed to be fixed/screwed down or not... I'm really unfamiliar with headsets! Thanks for all the help you all!
#2
Yup
Join Date: Jan 2004
Location: where the sunbeams end and the starlight begins
Posts: 3,083
Bikes: Kona Unit, planet X cx bike, khs fixed gear
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 6 Times
in
5 Posts
Originally Posted by exarkuhn15
Hey all, so I've been switching out the old Shimano cantilevers on my old Schwinn mountain bike with newer v-brakes from my newer Giant mountain bike, which I plan to sell.
I've hooked up the new brake/shifters and the installed the brakes, on the Schwinn, but as I was walking home I realized - I can't put the old Schwinn cantilevers on the Giant, because it has a suspension and no cable hanger on the fork!
Is there any part I can buy that will put a cable hanger on that fork or am I out of luck?
Also, another question about the headset - I pulled off the cable hanger from the Schwinn, which was serving as a spacer I guess. Now the locknut on tab doesn't really have anything to screw down on. Is this a problem and how do I fix that? Is it supposed to be tight on a spacer? I'm not really sure which parts of the headset are supposed to be fixed/screwed down or not... I'm really unfamiliar with headsets! Thanks for all the help you all!
I've hooked up the new brake/shifters and the installed the brakes, on the Schwinn, but as I was walking home I realized - I can't put the old Schwinn cantilevers on the Giant, because it has a suspension and no cable hanger on the fork!
Is there any part I can buy that will put a cable hanger on that fork or am I out of luck?
Also, another question about the headset - I pulled off the cable hanger from the Schwinn, which was serving as a spacer I guess. Now the locknut on tab doesn't really have anything to screw down on. Is this a problem and how do I fix that? Is it supposed to be tight on a spacer? I'm not really sure which parts of the headset are supposed to be fixed/screwed down or not... I'm really unfamiliar with headsets! Thanks for all the help you all!
__________________
When sadness fills my days
It's time to turn away
And then tomorrow's dreams
Become reality to me
When sadness fills my days
It's time to turn away
And then tomorrow's dreams
Become reality to me
#4
Yup
Join Date: Jan 2004
Location: where the sunbeams end and the starlight begins
Posts: 3,083
Bikes: Kona Unit, planet X cx bike, khs fixed gear
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 6 Times
in
5 Posts
Originally Posted by The Fixer
I don't think there is a cable hanger that'll adapt on a suspension fork. I've never seen one.
__________________
When sadness fills my days
It's time to turn away
And then tomorrow's dreams
Become reality to me
When sadness fills my days
It's time to turn away
And then tomorrow's dreams
Become reality to me
#5
Senior Member
Originally Posted by exarkuhn15
Is there any part I can buy that will put a cable hanger on that fork or am I out of luck
Or try one of these: https://sporting-goods.search-desc.eb...ofocusZunknown
Good luck
Tim
#6
Senior Member
Originally Posted by exarkuhn15
I can't put the old Schwinn cantilevers on the Giant, because it has a suspension and no cable hanger on the fork!