Rebuilding Campagnolo Ergo Brakes/Shifters
#1
Senior Member
Thread Starter
Join Date: Oct 2006
Location: Illinois
Posts: 539
Bikes: No bike at the moment; In process of building it.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Rebuilding Campagnolo Ergo Brakes/Shifters
Just how complicated/difficult is it to rebuild a Camagnolo Ergo brake/shifter system? Curious if it involves replacing parts, or just taking it apart and putting it back together after being re-tuned?
It all comes down to whether or not someone could do this at home without mechanic training...
It all comes down to whether or not someone could do this at home without mechanic training...
#2
bici accumulatori
Join Date: Jun 2002
Location: Hamilton, Ottawa, Maberly, Apsley, Ontario
Posts: 855
Bikes: 1985 Nishiki International Touring Bike, 1992 Vitus 979 road bike, 1996 Bianchi Premio road bike, 2002 Thin Blue LIne CO2 mountain bike, 2007 Rocky Mountain Sherpa touring bike, 1964 CCM roadster, 1959 CCM Motorbike, 2002 KHS FXT mtb + more to fix!
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
They say as long as you have some patience and are careful about little bits flying around, it's not too technical of a job. (Supposedly very satisfying when you're done!) I have a broken G spring in mine, plan on doing the job in a couple of weeks when the part comes in. I'll let you know how it turns out. Some pretty good info at https://www.yellowjersey.org/ergo_ps.pdf and in Leonard Zinns Road Bike Repair Manual
#3
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,095 Times
in
741 Posts
Originally Posted by Briareos
Just how complicated/difficult is it to rebuild a Camagnolo Ergo brake/shifter system? Curious if it involves replacing parts, or just taking it apart and putting it back together after being re-tuned?
It all comes down to whether or not someone could do this at home without mechanic training...
It all comes down to whether or not someone could do this at home without mechanic training...
The Campy Only web site (www.campyonly.com) has printed instructions available and Branford Bike (after they reopen in February) should be a good source for both written instructions and repair parts.
It's supposed to be a fairly intricate job but not beyond the home mechanic if you go slowly and take good notes.