Hi, how do you fix the cap that covers the ball bearings on the front wheel?
#1
Junior Member
Thread Starter
Join Date: Jan 2007
Posts: 5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Hi, how do you fix the cap that covers the ball bearings on the front wheel?
I recently bought a used 1999 cannondale m400.
The only thing I see wrong with it at this time is the front wheel. There is a flat cover and isn't tight onto the hub that covers the ball bearings and I believe it's getting dirty inside there.
I tried plugging the cap back inside but it won't stay. Does anyone know how to fix this problem on my own?
Do I need a new wheel or do I need a new hub?
Sorry I'm new to mountain biking and want to learn what I can so I don't have to take it to a bike shop. Thanks.
The only thing I see wrong with it at this time is the front wheel. There is a flat cover and isn't tight onto the hub that covers the ball bearings and I believe it's getting dirty inside there.
I tried plugging the cap back inside but it won't stay. Does anyone know how to fix this problem on my own?
Do I need a new wheel or do I need a new hub?
Sorry I'm new to mountain biking and want to learn what I can so I don't have to take it to a bike shop. Thanks.
#2
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,342
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6200 Post(s)
Liked 4,201 Times
in
2,357 Posts
Originally Posted by M400Dale
I recently bought a used 1999 cannondale m400.
The only thing I see wrong with it at this time is the front wheel. There is a flat cover and isn't tight onto the hub that covers the ball bearings and I believe it's getting dirty inside there.
I tried plugging the cap back inside but it won't stay. Does anyone know how to fix this problem on my own?
Do I need a new wheel or do I need a new hub?
Sorry I'm new to mountain biking and want to learn what I can so I don't have to take it to a bike shop. Thanks.
The only thing I see wrong with it at this time is the front wheel. There is a flat cover and isn't tight onto the hub that covers the ball bearings and I believe it's getting dirty inside there.
I tried plugging the cap back inside but it won't stay. Does anyone know how to fix this problem on my own?
Do I need a new wheel or do I need a new hub?
Sorry I'm new to mountain biking and want to learn what I can so I don't have to take it to a bike shop. Thanks.
It it's a rubber seal, it's probably decayed and you'll need a new one. Try a local shop.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#3
Junior Member
Thread Starter
Join Date: Jan 2007
Posts: 5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by cyccommute
Is it a steel or rubber seal? If it's steel, try gently bending the edge of the cover outward so that it's a tighter fit. It won't need much. Then use a rubber mallet to put it back in place. Don't go caveman on it. You should just tap it into place.
It it's a rubber seal, it's probably decayed and you'll need a new one. Try a local shop.
It it's a rubber seal, it's probably decayed and you'll need a new one. Try a local shop.
Its steel. I'll try what you said but should I first clean out the bearings and then relube it? What do I use to relube the bearings? Will any heavy lubricant work like lithium grease perhapS?
#4
Senior Member
Join Date: Nov 2006
Location: United Kingdom
Posts: 475
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
The cone should hold this in place... ideally the cone should go through it and the sheild then jam on the smooth edge of the cone. If it is working lose the hole in the sheild (that the axel fits through) is probably worn, it should not fit over the cone... but jam on it. In short as the wheel turns, the axel, cone and sheild should not... the cup turns around the sheild.
Lithium grease is fine, but a marine grease is better.. it is more water resistant.
Lithium grease is fine, but a marine grease is better.. it is more water resistant.
#6
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,342
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6200 Post(s)
Liked 4,201 Times
in
2,357 Posts
Originally Posted by Cadfael
The cone should hold this in place... ideally the cone should go through it and the sheild then jam on the smooth edge of the cone. If it is working lose the hole in the sheild (that the axel fits through) is probably worn, it should not fit over the cone... but jam on it. In short as the wheel turns, the axel, cone and sheild should not... the cup turns around the sheild.
Lithium grease is fine, but a marine grease is better.. it is more water resistant.
Lithium grease is fine, but a marine grease is better.. it is more water resistant.
As for grease, buy a tube of Phil's grease or Park. It'll last for years. A tub of marine grease is okay but it will last for several lifetimes
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#7
Senior Member
Originally Posted by cyccommute
The type of seal he's talking about is a metal ring that is press fit into the hub and doesn't really make contact with the cone or axle nuts. It's not meant to turn with the axle but just to shield the bearings from spray. It's not really a seal, per say.
As for grease, buy a tube of Phil's grease or Park. It'll last for years. A tub of marine grease is okay but it will last for several lifetimes
As for grease, buy a tube of Phil's grease or Park. It'll last for years. A tub of marine grease is okay but it will last for several lifetimes
#8
Senior Member
Join Date: Nov 2006
Location: United Kingdom
Posts: 475
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by Big_knob
Lithium grease?!?!
I always read on here that Lithium grease was very baaad!
I always read on here that Lithium grease was very baaad!
If like me you relube every 6 weeks there is nothing wrong with Lithium Grease! It could even last longer!
But... use a real water resistant grease (like marine grease) and it will last ... um... a year even!
Anyway, as regards the bearing sheild. I fess up, I got the wrong end of the stick. I have never seen that type of sheild... all of my bikes have had the fixed sheild, but most of my bikes are cheap!