Water in Mavic A719
#1
Senior Member
Thread Starter
Join Date: Apr 2006
Location: Sioux Falls
Posts: 223
Bikes: Bianchi Road bike, Nashbar Ultegra triple cyclocross, Raleigh full XT hybrid, lugged steel Schwinn, Full rigid Diamondback MTB
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Water in Mavic A719
The bike trail I commute on has had about six inches of water in spots and while this doesn't seem to be enough to affect the hubs or bottom bracket I can hear the water sloshing around if the wheels are spun. This got me to wondering if there is any damage being done to the wheels by leaving the water in them or if they would need to be drained after every ride (what a PITA). My biggest concern is that the temperatures are regularly dropping to well below freezing. Does anyone have any experience with water in double walled wheels (especially if it freezes)?
Thanks in advance,
Scott
Thanks in advance,
Scott
#2
Happy old man
Join Date: Sep 2004
Location: West coast of New England
Posts: 621
Bikes: Trek 4500 mountain bike, Trek 7500fx disk, and Trek 2200 Road bike
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Are you are saying that you have water inside the tire with the inner tube?
__________________
https://www.thegmbc.com/
https://www.gmaa.net/
In New England we have nine months of winter and three months of damned poor sledding.
https://www.thegmbc.com/
https://www.gmaa.net/
In New England we have nine months of winter and three months of damned poor sledding.
#3
Asshat
Join Date: Jul 2005
Location: Atlanta, GA
Posts: 333
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Or are you saying in the hollow space between the walls... as in it got there by coming in through the eyelets.
It shouldn't harm a thing as the rims are aluminum. My Open Pro's are doing fine after a season in slush.
It shouldn't harm a thing as the rims are aluminum. My Open Pro's are doing fine after a season in slush.
#4
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 643 Times
in
364 Posts
I doubt it's doing any harm but I know it isn't doing your wheels any good. If it was my bike, I'd pull the tires and hang them up with the valve hole pointed down about once a week until the trail dries up.
#5
Senior Member
Thread Starter
Join Date: Apr 2006
Location: Sioux Falls
Posts: 223
Bikes: Bianchi Road bike, Nashbar Ultegra triple cyclocross, Raleigh full XT hybrid, lugged steel Schwinn, Full rigid Diamondback MTB
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Thanks for your replies,
The water isn't getting in the innertube, it is in hollow of the wheel itself. While I am concerned about the nipples corroding to the spokes etc, the main concern is what happens when water freezes inside a double walled wheel. Will the expanding water wreck the wheel or am I worrying about nothing.
Thanks again,
Scott
The water isn't getting in the innertube, it is in hollow of the wheel itself. While I am concerned about the nipples corroding to the spokes etc, the main concern is what happens when water freezes inside a double walled wheel. Will the expanding water wreck the wheel or am I worrying about nothing.
Thanks again,
Scott
#6
Year-round cyclist
Join Date: Apr 2002
Location: Montréal (Québec)
Posts: 3,023
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
I have three A-719 and never got any water in them.
Basically, I don't see any real problem with water in the rim, as there won't be litres of it anyway.
Because the amount of water is limited, there is enough room to allow it to freeze without problem. Actually, the biggest "problem" you might have is if it freezes all in the same place and causes the wheel to be imbalanced. But since most bicycle wheels are imbalanced anyways...
Basically, I don't see any real problem with water in the rim, as there won't be litres of it anyway.
Because the amount of water is limited, there is enough room to allow it to freeze without problem. Actually, the biggest "problem" you might have is if it freezes all in the same place and causes the wheel to be imbalanced. But since most bicycle wheels are imbalanced anyways...