Campy Veloce Brake Bolt Too Short?!
#1
Newbie
Thread Starter
Campy Veloce Brake Bolt Too Short?!
Hey, everyone -
More Pinnarello misadventures...
The Veloce group I ordered arrived today. When I went to install the brake calipers, I found the bolts to be far too short. The bike is a 2000 Prince; the fork thickness is about 45mm, and the rear stay thickness is about 30mm.
Are there replacement bolts available for carbon fork and stay installations? Or will I need to find a different brakeset?
Thanks,
Scott
More Pinnarello misadventures...
The Veloce group I ordered arrived today. When I went to install the brake calipers, I found the bolts to be far too short. The bike is a 2000 Prince; the fork thickness is about 45mm, and the rear stay thickness is about 30mm.
Are there replacement bolts available for carbon fork and stay installations? Or will I need to find a different brakeset?
Thanks,
Scott
#2
Guest
Posts: n/a
Mentioned: Post(s)
Tagged: Thread(s)
Quoted: Post(s)
Originally Posted by bliorg
Are there replacement bolts available for carbon fork and stay installations? Or will I need to find a different brakeset?
#3
Newbie
Thread Starter
Done! Found a local shop that had a couple 20mm nuts. Worked out fine.
Last edited by bliorg; 05-28-07 at 05:01 AM.
#4
*
Join Date: Jan 2007
Posts: 3,458
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Originally Posted by bliorg
Done! Found a local shop that had a couple 20mm bolts. Worked out fine.
#5
Newbie
Thread Starter
Not sure why I wrote that. Posting faster than I'm thinking, apparently...