Advertise on Bikeforums.net



User Tag List

Results 1 to 6 of 6
  1. #1
    Junior Member
    Join Date
    May 2007
    Posts
    5
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Diagram of Shimano 200gs right shift lever?

    I would love to see how the cable is supposed to go into this thing. I need to recable an old Trek Antelope with a 7 speed shifter on the right side. There is not cable on the bike at all and I'm just not sure how it goes.

  2. #2
    The Red Lantern Rev.Chuck's Avatar
    Join Date
    Apr 2003
    Location
    Raleigh NC
    Posts
    5,967
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    I don't have a dia. but you need to shift to the seventh position(upper button if it is push-push, index finger button if it is push-pull)
    Look opposite the adjuster(or the stop for the housing if it does not have an adjuster) there should be a hole in the plastic to feed the cable thru. If you cannot see the internal stop for the cable end thru the hole, then it has not been shifted far enough, you need to shift the other way, or the shifter is sticking(If you don't get a full set of clicks it is sticking and spraying some solvent in there can help)
    Are you a registered member? Why not? click here to register. Its free, and only takes 27 seconds!
    Help out the forums, abide by our community guidelines.

    I am in the woods and I have gone crazy.

  3. #3
    Senior Member
    Join Date
    Apr 2007
    Posts
    3,499
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    Have you tried www.shimano.com? I don't know about that item, but so far, they've had exploded views and users manuals for everything I've tried to find.

  4. #4
    Junior Member
    Join Date
    May 2007
    Posts
    5
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    thanks for the quick response

  5. #5
    Junior Member
    Join Date
    May 2007
    Posts
    5
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    They have lots of diagrams but nothing that old

  6. #6
    Non Tribuo Anus Rodentum and off to the next adventure (RIP) Stacey's Avatar
    Join Date
    Dec 2002
    Posts
    9,163
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    It's just a index/friction thumb shifter, the casing goes in between the pod & the bar from the center of the bars, the cable slides in from the other side. Look for the little hole behind the lever.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •