Seat tube angle question
#1
Drop Master
Thread Starter
Join Date: Jun 2007
Location: Orlando FL
Posts: 221
Bikes: Fuji Roubaix / Scott CR-1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Seat tube angle question
My present seat tube angle is 73 degrees. For comfort reasons I have backed my seat pass the stop mark on the rails. I'm a little worried that I have now put too much pressure on the rails in the back mounting of my seat and may cause some damage.
I was thinking that the solution would be to get another seat post where the rail mounts sit a little further back from the post which would allow me to return the seat back to the "stop point" on the seat rails but maintain the distance from the front that I am looking for.
What has me confused about this is the listing of a possible seat post that I want says that this seat post moves the seat forward instead of back. (From a 73 degrees to 78 degrees) Is this correct? I thought that going from a 73 degree to a 78 degree post seat mount would sit the seat futher back not forward. The picture of this seat post even looks like it would move the seat further aft rather than forward. What am I missing here?
https://cgi.ebay.com/Profile-Carbon-F...QQcmdZViewItem
I was thinking that the solution would be to get another seat post where the rail mounts sit a little further back from the post which would allow me to return the seat back to the "stop point" on the seat rails but maintain the distance from the front that I am looking for.
What has me confused about this is the listing of a possible seat post that I want says that this seat post moves the seat forward instead of back. (From a 73 degrees to 78 degrees) Is this correct? I thought that going from a 73 degree to a 78 degree post seat mount would sit the seat futher back not forward. The picture of this seat post even looks like it would move the seat further aft rather than forward. What am I missing here?
https://cgi.ebay.com/Profile-Carbon-F...QQcmdZViewItem
#2
Senior Member
The seat will not be damaged by adjusting it to the limit.
__________________
Il faut de l'audace, encore de l'audace, toujours de l'audace
1980 3Rensho-- 1975 Raleigh Sprite 3spd
1990s Raleigh M20 MTB--2007 Windsor Hour (track)
1988 Ducati 750 F1
Il faut de l'audace, encore de l'audace, toujours de l'audace
1980 3Rensho-- 1975 Raleigh Sprite 3spd
1990s Raleigh M20 MTB--2007 Windsor Hour (track)
1988 Ducati 750 F1
#3
*
Join Date: Jan 2007
Posts: 3,458
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
that type post is often used by triathletes to move the seat farther forward. Steeper ST angles (towards 90) move the seat forward. Slacker angles(<73), like on touring bikes, move the seat back. You would want a seatpost with some "setback"