brake help
#1
Junior Member
Thread Starter
Join Date: Sep 2007
Posts: 4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
brake help
brakes will not auto release... i have to push them back after i use them. what could the problem be?
already tried putting more tension on the springs, not sure of what else i can do.
already tried putting more tension on the springs, not sure of what else i can do.
#2
Elitist Troglodyte
Join Date: Jun 2006
Location: Dallas
Posts: 6,925
Bikes: 03 Raleigh Professional (steel)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Take the cable off the brakes and check each part of the system.
1) verify that the brake levers are releasing
2) Check that the brake cable housing isn't dragging
3) Be sure that the arm pivots aren't binding.
1) verify that the brake levers are releasing
2) Check that the brake cable housing isn't dragging
3) Be sure that the arm pivots aren't binding.
__________________
Stupidity got us into this mess - why can't it get us out?
- Will Rogers
Stupidity got us into this mess - why can't it get us out?
- Will Rogers