STX crank removal
#1
Senior Member
Thread Starter
STX crank removal
I need to pull the crank off of an STX Shimano. Anyone know the hexbolt size that holds it on? I would like to save a trip to the tool store! Looks close to 8mm
#2
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,095 Times
in
741 Posts
All Shimano cranks with Allen head crank mounting bolts that I've ever seen use an 8mm allen key. BTW, get a long arm wrench. A standard L-key won't give you enough torque to remount the crank. Better yet, get an 8 mm socket bit so you can use a 3/8" or 1/2" square drive ratchet.
#3
Senior Member
Thread Starter
Thanks! I have an 8mm somewhere in my toolset. Its for 1/2 inch drive so I am there!
#4
Senior Member
Thread Starter
Also, I just need the one crank arm off to get the middle chain ring on. Do I need puller as well as the hex wrench?