Rebuilding pre-1999 Campagnolo Veloce sealed freehub - how much goo is good?
#1
Project B
Thread Starter
Join Date: May 2006
Location: Vancouver, BC
Posts: 48
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Rebuilding pre-1999 Campagnolo Veloce sealed freehub - how much goo is good?
My rim wall blew out this morning and I figured it would be a good opportunity to pull apart the hub before rebuilding the wheel.
Will a thin coat of Phil's all around do, or should I really goop it up, bearing (pun unintended) in mind that it's a Vancouver work bike that sees some pretty horrific grime. How heavy should I go on the pawls?
Branford Bike diagram for reference:
What components should be greased, and how liberally?
Will a thin coat of Phil's all around do, or should I really goop it up, bearing (pun unintended) in mind that it's a Vancouver work bike that sees some pretty horrific grime. How heavy should I go on the pawls?
Branford Bike diagram for reference:
What components should be greased, and how liberally?
Last edited by Roam; 02-13-08 at 06:42 PM.