Problem front brake thump
#1
Muscle bike design spec
Thread Starter
Join Date: Oct 2004
Location: Sterling VA
Posts: 3,688
Bikes: 70 Atala Record Proffesional, 00 Lemond, 08 Kestrel Evoke, 96 Colnago Master Olympic, 01 Colnago Ovalmaster, 76 Raleigh Gran Sport, 03 Fuji World, 86 Paramount, 90 Miyata CF, 09 Ritchey Breakaway CX, Bianchi Trofeo, 12 OutRiderUSA HyperLite
Mentioned: 1 Post(s)
Tagged: 1 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Problem front brake thump
Hi,
I just finished a cross bike build last week and a problem cropped up on the front wheel/brake. It has a CF front fork with cantilever mounts and Tektra mini-V brakes. After 12 or so miles the brake/wheel developed a hard thump at every revolution. I adjusted the spokes last night and the wheel spins very freely and true. There are no bulges in the tire and the brake pads are aligned with the wheel rim.
Is there anything I should check? Thanks.
I just finished a cross bike build last week and a problem cropped up on the front wheel/brake. It has a CF front fork with cantilever mounts and Tektra mini-V brakes. After 12 or so miles the brake/wheel developed a hard thump at every revolution. I adjusted the spokes last night and the wheel spins very freely and true. There are no bulges in the tire and the brake pads are aligned with the wheel rim.
Is there anything I should check? Thanks.
__________________
Korval is Ships
See my Hyperlite 411 it's the photo model on OutRiderUSA web page
See my Hyperlite 411 it's the photo model on OutRiderUSA web page
#2
You Know!? For Kids!
Check the join seam of the rim. May not be smooth. Might need some work with file or emory cloth to smooth up.
__________________
Are you a registered member? Why not? Click here to register. It's free and only takes 27 seconds! Help out the forums, abide by our community guidelines.
Are you a registered member? Why not? Click here to register. It's free and only takes 27 seconds! Help out the forums, abide by our community guidelines.
#3
Muscle bike design spec
Thread Starter
Join Date: Oct 2004
Location: Sterling VA
Posts: 3,688
Bikes: 70 Atala Record Proffesional, 00 Lemond, 08 Kestrel Evoke, 96 Colnago Master Olympic, 01 Colnago Ovalmaster, 76 Raleigh Gran Sport, 03 Fuji World, 86 Paramount, 90 Miyata CF, 09 Ritchey Breakaway CX, Bianchi Trofeo, 12 OutRiderUSA HyperLite
Mentioned: 1 Post(s)
Tagged: 1 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
I did find one bolt was slightly loose and tightened that. I'll see if that makes a difference when I head out at lunch.
__________________
Korval is Ships
See my Hyperlite 411 it's the photo model on OutRiderUSA web page
See my Hyperlite 411 it's the photo model on OutRiderUSA web page