Crank tool
#1
Schleckaholic
Thread Starter
Join Date: Apr 2008
Location: Carteret Co., NC, USA
Posts: 1,230
Bikes: '08 Trek 1.2, Schwinn Avenue Hybrid, '11 GT Sport
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Crank tool
I have a 70's something Fuji I just got and am in the process of converting it over to a commuter. I need a tool to remove the crank and have no idea where to start. I think the BB is a square taper, from what I can tell, and am thinking I need something like this, Crank tool.
Is this all I need for crank removal? If so what would I need for removing the BB if I need to do that?
It has 4 notches in it. My LBS is over 30 minutes away in another town so it isn't really 'local'.
Any help would be appreciated and Thanks! in advance.
Is this all I need for crank removal? If so what would I need for removing the BB if I need to do that?
It has 4 notches in it. My LBS is over 30 minutes away in another town so it isn't really 'local'.
Any help would be appreciated and Thanks! in advance.
#3
Schleckaholic
Thread Starter
Join Date: Apr 2008
Location: Carteret Co., NC, USA
Posts: 1,230
Bikes: '08 Trek 1.2, Schwinn Avenue Hybrid, '11 GT Sport
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
that works but I have one problem.. the plastic caps that are on there. should I just break them off or is there actually a certain way they should come off. I can't seem to get them loose.
edit: I found it. Just had to cut a piece of metal wide enough to fit in the cup so I could turn it.
edit: I found it. Just had to cut a piece of metal wide enough to fit in the cup so I could turn it.
Last edited by K&K_Dad; 05-06-08 at 01:09 PM.