Neuvation R28 SL3 Hub Play w/ceramics
#1
Newbie
Thread Starter
Join Date: Aug 2007
Posts: 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Neuvation R28 SL3 Ceramic Hub Play
I recently bought some Neuvation R28 SL3's and upgraded to the ceramic bearings...I noticed play in the front and rear hubs so I re-pressed the bearings...after re-pressing and wiggling...no play
I then went on a ride, checked the hubs after getting home, and the play is back...what gives?
Is it common for this wheelset to have a small amount of play in the hubs? If not how could I fix the hub play permanently?
I then went on a ride, checked the hubs after getting home, and the play is back...what gives?
Is it common for this wheelset to have a small amount of play in the hubs? If not how could I fix the hub play permanently?
Last edited by funky; 05-21-08 at 06:54 PM.
#2
Senior Member
try righting your QR more see if that help .
#3
Newbie
Thread Starter
Join Date: Aug 2007
Posts: 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks for the reply...
QR tight...cassette lockring torqued to 40nm...I think the problem lies in the ceramic bearings being a little narrower than stock
QR tight...cassette lockring torqued to 40nm...I think the problem lies in the ceramic bearings being a little narrower than stock
#4
Senior Member
are your cones tights ? if they are losses they can gives you feelings you are having .