Carbon steerer cut ???
#1
Junior Member
Thread Starter
Join Date: Sep 2007
Posts: 24
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Carbon steerer cut ???
Need to cut SID-WC Carbon steerer tube! Special Starnut installed !!
How to move STARNUT about 3cm inside ********************
--Is it possible that SID-WC 2006, can NOT use 80mm travel? (without 65mm Travel reducer)?
....THANK YOU...dc
How to move STARNUT about 3cm inside ********************
--Is it possible that SID-WC 2006, can NOT use 80mm travel? (without 65mm Travel reducer)?
....THANK YOU...dc
#3
Senior Member
Join Date: Dec 2004
Location: Quahog, RI
Posts: 1,509
Bikes: Giant TCR Comps, Cdale R5000, Klein Q-Pro, Litespeed Siena, Piasano 105, Redline Conquest Pro, Voodoo Bizango, Fuji Aloha
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
He's probably talking about the expansion plug, but there are a few proprietary starnuts in CF steerers, notably Cannondale. You should be able to tap down the expansion plug (gently) with a socket of piece of pipe.
#4
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
If it is an expansion plug, there should be a allen bolt or nut that can be loosened to allow it to move easily and be retightened in the new position. These things are usually easily removable and reusable.
#5
Senior Member
Join Date: Dec 2005
Location: Boulder, Colorado
Posts: 1,383
Bikes: Cinelli Supercoursa 69, Ritchey Breakaway Cross, Mondonico Diamond Extra 05, Coors Light Greg Lemond (built by Scapin) 88, Scapin MTB, Stumpjumper 83, Specialized Stumpjumper M4, Lemond Poprad 2001
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Liked 2 Times
in
1 Post
Take it to a shop...any mistakes will be much more costly than the few bucks you will pay them to do the job. They have the proper tools to cut the ST without buggering it up.
#6
Junior Member
Thread Starter
Join Date: Sep 2007
Posts: 24
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
THANKS -anything about TRAVEL ?
I got it out with an easy hit(RubberHammer). It has no allen..- it is fixed with Top-screw thread!! (extens as more screw in)
Anybody know anything about TRAVEL? on SID-WC 2007, I meassure only 65mm maximum travel ???
As I know is NO 63mm reducer installed. PLEASE let me know.
--THANKS ++ SORRY 4 my bad ENGLISH
[Sorry to shock you CHenry: of course NO,NO "usual starnut"]
Last edited by dccore; 06-09-08 at 08:12 PM.
#7
Junior Member
Thread Starter
Join Date: Sep 2007
Posts: 24
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
THANKS -more question SID-WC ?
On my fully (Cdl Jekyll 2001) I changed Crankset to XT-Hollow.I, and somehow it seems not as wide as before(orig.=Coda). I have hard time measuring wideness of Cranks. Is it possible? is different? BottomBracket is 175mm. Can I install "distance Rings" ???
On Hardtail (XTR-Hollow.II>2004) I have 2Rings on left & right side ?? Is it standard(normal) ??
--THANKS--for HELP-- dcCore {SORRY 4 my bad ENGLISH}
On Hardtail (XTR-Hollow.II>2004) I have 2Rings on left & right side ?? Is it standard(normal) ??
--THANKS--for HELP-- dcCore {SORRY 4 my bad ENGLISH}
Last edited by dccore; 06-09-08 at 07:42 PM.