`q
07-16-08, 05:54 PM
#1
Senior Member
Thread Starter
Join Date: Jun 2007
Posts: 635
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
`q
Where is the cheapest place to purchase a 9sp 14-25 Ultegra Cassette? My current cassette is worn out and I would love to start junior racing, meaning that I need a 14-25 cassette in order to comply with junior gearing`q. Unfortunately, none of the discount shops I can find carry the 14-25 cassette. The only online shop I could find is Harris Cyclery. My LBS charges about $75 for the cassette, and with shipping, Harris is about $78. Anyone know of a place with cheaper prices?
07-16-08, 06:04 PM
#2
Low car diet
Join Date: Aug 2007
Location: Corvallis, OR, USA
Posts: 2,407
Bikes: 2006 Windsor Dover w/105, 2007 GT Avalanche w/XT, 1995 Trek 820 setup for touring, 201? Yeah single-speed folder, 199? Huffy tandem.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 4 Times
in
4 Posts
https://www.nashbar.com/profile.cfm?c...A%20Freewheels
$65.99 - 6.60 [10% discount*] + 9.25 [shipping] = $68.64
See their site or here: https://www.bikeforums.net/showthread...137335&page=21
EDIT: SORRY; just noticed you need 9-speed instead of 10-speed.
$65.99 - 6.60 [10% discount*] + 9.25 [shipping] = $68.64
See their site or here: https://www.bikeforums.net/showthread...137335&page=21
EDIT: SORRY; just noticed you need 9-speed instead of 10-speed.
Last edited by JiveTurkey; 07-16-08 at 06:09 PM.
07-16-08, 06:33 PM
#3
Really Old Senior Member
This may sound a bit dumb, but-
Can you use a 13-25, and set the H limit screw so you only get 8 gears. You'd lose the 18T cog.
Grind off the teeth on the 13T if necessary?? Not elegant, but....
Else, smaller chain ring?
Can you use a 13-25, and set the H limit screw so you only get 8 gears. You'd lose the 18T cog.
Grind off the teeth on the 13T if necessary?? Not elegant, but....
Else, smaller chain ring?
