Cycling and bicycle discussion forums. 
   Click here to join our community Log in to access your Control Panel  


Go Back   > >

Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

User Tag List

Reply
 
Thread Tools Search this Thread
Old 08-19-08, 07:28 PM   #1
familyguy
Running on plenty
Thread Starter
 
familyguy's Avatar
 
Join Date: Dec 2007
Location: Sydney, Australia
Bikes: Too many to list
Posts: 145
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
LOOK pedal workshop manuals or instructions

Morning all

I've picked up a few sets of Look pedals for various bikes, and they're all different.

Does anyone have/know of a link or PDF workshop manuals or instruction sheets for these pedals?

One pair is defintely an older model, fairly scuffed up but working well. Another pair is the classic red and white colour set (white body, red caps and red plastic clips), probably from the late 80's. Then there's a pair of recent black PP206's and a pair of slightly older blue PP396's.

Any help much appreciated.

Jim
familyguy is offline   Reply With Quote
Old 08-20-08, 08:41 PM   #2
familyguy
Running on plenty
Thread Starter
 
familyguy's Avatar
 
Join Date: Dec 2007
Location: Sydney, Australia
Bikes: Too many to list
Posts: 145
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Bumping this one time for any help.

Jim
familyguy is offline   Reply With Quote
Old 08-20-08, 09:35 PM   #3
ivan_yulaev
Senior Member
 
Join Date: Mar 2004
Location: San Diego, CA
Bikes: See sig.
Posts: 1,651
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
They're pedals. What do you need to know about them?
ivan_yulaev is offline   Reply With Quote
Old 08-20-08, 11:33 PM   #4
familyguy
Running on plenty
Thread Starter
 
familyguy's Avatar
 
Join Date: Dec 2007
Location: Sydney, Australia
Bikes: Too many to list
Posts: 145
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Bearing sizes, torque ranges for bolts, washer/spacers/shims supplied or required, removable or consumable parts and replacement part numbers for same, wear limits if applicable.

For instance: the red and white pair. Without the end caps, the spindles float about 2mm left/right. With the end caps, no float. Is this normal? Is it not normal? Has somebody serviced them and left a shim or washer out?

And yes, I've tried the Look user forums. Its ten kinds of useless.

Jim
familyguy is offline   Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -6. The time now is 08:33 AM.