Another BB question.
08-23-08, 05:45 PM
#1
Junior Member
Thread Starter
Join Date: Aug 2008
Location: Currently Portland OR.
Posts: 18
Bikes: '92 Merlin
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Another BB question.
Are BBs pretty much universal? Can a new bottom bracket fit into an old BB shell? or are the measurements and standards different as time goes on? (as I found out with my 1" head tube). I'm wondering what will work with my 91' Merlin. Thank you all for you help.
08-23-08, 06:04 PM
#2
Senior Member
Join Date: Jul 2008
Posts: 83
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Sounds like you have a lot of questions... most of them will be answered at www.sheldonbrown.com just read his article on bottom brackets. That being said you probably just have a 68mm English threaded bb (if you can dig up a spec sheet on the bike it will probably tell you), just make sure you get the right length spindle for your crank set.
08-23-08, 06:28 PM
#3
Junior Member
Thread Starter
Join Date: Aug 2008
Location: Currently Portland OR.
Posts: 18
Bikes: '92 Merlin
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks,
I do have a lot of questions. I have been tinkering with bikes since I was very young- usually I just take the bike into the shop and buy the part they tell me. I've been trying to learn more about the different sizes and geometry of everything. I can assemble everything if it's all right in front of me, but put me in a room by myself with a bunch of different parts and I'm pretty much lost.
I do have a lot of questions. I have been tinkering with bikes since I was very young- usually I just take the bike into the shop and buy the part they tell me. I've been trying to learn more about the different sizes and geometry of everything. I can assemble everything if it's all right in front of me, but put me in a room by myself with a bunch of different parts and I'm pretty much lost.
08-23-08, 06:54 PM
#4
cab horn
Join Date: Jun 2004
Location: Toronto
Posts: 28,353
Bikes: 1987 Bianchi Campione
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 42 Post(s)
Likes: 0
Liked 25 Times
in
18 Posts
'91 merlin, mountain bike or road bike? Probably will be an english bb. In which case a modern replacement will be easy to find. Just need to know length + shell width (68/73).
08-23-08, 07:39 PM
#5
Senior Member
Join Date: May 2007
Location: SW Idaho
Posts: 643
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
If you pull out the old BB, it will have the size stamped or printed on the surface... Something like 68x108.5... You'll need a replacement with the same dimensions.
In this case 68 would refer to the diameter of the BB (it would be English - 70 is Italian). 108.5 would refer to the width. Narrower or wider change your chainline and mess up how your bike shifts.
Hope this helps.
In this case 68 would refer to the diameter of the BB (it would be English - 70 is Italian). 108.5 would refer to the width. Narrower or wider change your chainline and mess up how your bike shifts.
Hope this helps.
08-23-08, 08:12 PM
#6
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,095 Times
in
741 Posts
If you pull out the old BB, it will have the size stamped or printed on the surface... Something like 68x108.5... You'll need a replacement with the same dimensions.
In this case 68 would refer to the diameter of the BB (it would be English - 70 is Italian). 108.5 would refer to the width. Narrower or wider change your chainline and mess up how your bike shifts.
Hope this helps.
In this case 68 would refer to the diameter of the BB (it would be English - 70 is Italian). 108.5 would refer to the width. Narrower or wider change your chainline and mess up how your bike shifts.
Hope this helps.
08-23-08, 10:49 PM
#9
Junior Member
Thread Starter
Join Date: Aug 2008
Location: Currently Portland OR.
Posts: 18
Bikes: '92 Merlin
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks,
All the information helps a lot. I just didn't want to buy something and then have to send it back. It's a mountain bike by the way.
All the information helps a lot. I just didn't want to buy something and then have to send it back. It's a mountain bike by the way.
08-23-08, 10:56 PM
#10
Really Old Senior Member
Sometimes, after paying S&H, it's cheaper to support your LBS, instead of UPS.
https://sheldonbrown.com/harris/bottombrackets.html
https://sheldonbrown.com/harris/bottombrackets.html
08-23-08, 11:03 PM
#11
Senior Member
You can measure your own spindle length so you get the right one. Just remove the cranks and then measure from end to end on the spindle in mm's. You can also measure the width of your BB shell to see what width of BB you need.
Most modern bikes use either a 68 or a 73 mm shell width. Spindle length varies from brand to brank of crankset.
If you upgrade to an ISIS or Octalink option the current 68 mm standard is a 113 mm spindle. So that's 68x113 for the size.
You can also measure the width of your BB shell on your Merlin just with a metric ruler or an inch ruler and convert. In this case what you see (from the outside) is what you get.
Not many bikes made in the US or sold by US brands use anything but English threaded BB's. Only your exotic Italian bikes may vary from this. And French offerings of course. But it's a Merlin and not a Motobecane....
Most modern bikes use either a 68 or a 73 mm shell width. Spindle length varies from brand to brank of crankset.
If you upgrade to an ISIS or Octalink option the current 68 mm standard is a 113 mm spindle. So that's 68x113 for the size.
You can also measure the width of your BB shell on your Merlin just with a metric ruler or an inch ruler and convert. In this case what you see (from the outside) is what you get.
Not many bikes made in the US or sold by US brands use anything but English threaded BB's. Only your exotic Italian bikes may vary from this. And French offerings of course. But it's a Merlin and not a Motobecane....
