Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

Old Carbon Fiber .. death trap?

Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

Old Carbon Fiber .. death trap?

Old 09-05-08, 05:47 PM
  #1  
Member
Thread Starter
 
hipster_doofus's Avatar
 
Join Date: Oct 2007
Location: Nashville, TN
Posts: 25

Bikes: Trek 1500, Giant Rincon, GT Timberline

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Old Carbon Fiber .. death trap?

I thought I got a good deal on a road bike, but now I'm afraid to ride it. It's a Specialized Allez "Epic" and from what I've read on the Internet it was probably made in 1989 or so. It's light and rides nice but I didn't know the whole "CARBON FIBER BLOWS UP AND KILLS YOU" thing when I got it. Now I guess it's an "Epic" failure on my part.

I'm thinking I should just take the 105 hardware and put it on a old metal frame.

It's a 60cm and I weigh probably 225lbs or so.

Tell me it's going to break in half and impale me in the street, and you'll save my life.
hipster_doofus is offline  
Old 09-05-08, 06:00 PM
  #2  
cab horn
 
Join Date: Jun 2004
Location: Toronto
Posts: 28,353

Bikes: 1987 Bianchi Campione

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 42 Post(s)
Likes: 0
Liked 25 Times in 18 Posts
Nobody can tell you that without at the very least inspecting the frame for themselves.
operator is offline  
Old 09-05-08, 06:18 PM
  #3  
messenger
 
Join Date: Aug 2008
Location: WLA
Posts: 599

Bikes: pinarellos and a colnago

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time in 1 Post
its going to break in half--- you are going to kill yourself.... whew
G piny parnas is offline  
Old 09-05-08, 06:26 PM
  #4  
sch
Senior Member
 
Join Date: May 2003
Location: Mountain Brook. AL
Posts: 4,002
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 303 Post(s)
Likes: 0
Liked 136 Times in 104 Posts
Inspection of the frame should pick up any major problems. Frames in
that era were glued together tubes on lugs and problems include
failure of the glue line at lugs. The coatings on the CF can deteriorate
and make the surface look crappy. A friend had an early '90s similar
frame that came loose at the BB and he simply regued it with more
modern epoxy and rode it for a year or two before replacing. It was
used and about 12yrs old when he got it. Tapping the tubes should
produce a slightly musical note and not a thud. Significant cracks
will almost always telegraph through to the surface. A good exam
should be enough to start.
sch is offline  
Old 09-05-08, 06:35 PM
  #5  
Member
Thread Starter
 
hipster_doofus's Avatar
 
Join Date: Oct 2007
Location: Nashville, TN
Posts: 25

Bikes: Trek 1500, Giant Rincon, GT Timberline

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by G piny parnas
its going to break in half--- you are going to kill yourself.... whew
Thanks guys! I knew I could count on the Internet for sagely advice. There's some surface scars on the frame but nothing major. I'm still pretty afraid of it so I think I'll sell the frame on CL with enough warning the clear my conscious.

.. anyone want a used road bike frame?


Originally Posted by sch
lots of info
Thank you for that bit of information too. I might take it riding this weekend while I'm shopping for another frame.

Last edited by hipster_doofus; 09-05-08 at 06:42 PM.
hipster_doofus is offline  
Old 09-05-08, 11:33 PM
  #6  
Senior Member
 
Iowegian's Avatar
 
Join Date: Dec 2005
Location: Boulder, Colo
Posts: 2,038
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 101 Post(s)
Liked 14 Times in 12 Posts
I don't blame you. A guy at work had a /new/ carbon bike snap on him. Luckily he wasn't hurt and he got a replacement frame for free. He rides the new frame but if it was me, I think I'd switch... I'm sure the major danger of carbon bikes is being hit by a car, etc but I still feel more confident on steel.
Iowegian is offline  
Old 09-06-08, 02:09 AM
  #7  
Boomer
 
maddmaxx's Avatar
 
Join Date: Nov 2003
Posts: 7,214

Bikes: Diamondback Clarity II frame homebuilt.

Mentioned: 106 Post(s)
Tagged: 0 Thread(s)
Quoted: 16098 Post(s)
Liked 1,457 Times in 1,064 Posts
If you like sleeping at night, then I suppose that you don't want to know about the failure modes of aluminium bicycle frames.


To put this in perspective, have you heard of an overwhelming number of liability claims putting bicycle manufacturers out of business. Probably not. There are stories of carbon frame failures out there. Some of them are actually true. There are also stories of aluminium or steel frame failures and some of them are also true. The internet, while a great source of information, is also one of the worlds best sources of misinformation.

Do the same thing with your bike that you would do with any other, inspect it (or if you don't know what to look for have it inspected) every now and then, maintain it, repair it as necessary and ride it.

Now the disclaimer. At 225lb riding weight, inspect your bike more often, even your non carbon one. Weigh carefully your options for some equipment (pun intended) and pay attention to manufacturers limits. There are weight limits for some components used on bicycles because that's the nature of compromise when producing performance at a given weight. One of the best examples of this is titanium axles for pedals.
__________________

Last edited by maddmaxx; 09-06-08 at 02:14 AM.
maddmaxx is offline  
Old 09-06-08, 05:54 AM
  #8  
Senior Member
 
Join Date: Jun 2008
Posts: 411
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
it is true that carbon will not yield like steel will so you will not get a warning before failure. HOWEVER carbon is extremely strong material. the tensile strength is typically over 100ksi. you may need to worry about fatigue failure, however the carbon will get less stiff as it fatigues. you can probably feel it get mushy long before it will break, at least you can in rowing. I've never ridden a carbon frame to failure before.
crocodilefundy is offline  
Old 09-06-08, 06:01 AM
  #9  
Perineal Pressurized
 
dobber's Avatar
 
Join Date: Oct 2003
Location: In Ebritated
Posts: 6,555
Mentioned: 0 Post(s)
Tagged: 1 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 2 Times in 2 Posts
I'm riding an almost 20 yo aluminum frame with bonded joints. I tip the scales at about 240#. Am I scared of imminent failure? No.
__________________
This is Africa, 1943. War spits out its violence overhead and the sandy graveyard swallows it up. Her name is King Nine, B-25, medium bomber, Twelfth Air Force. On a hot, still morning she took off from Tunisia to bomb the southern tip of Italy. An errant piece of flak tore a hole in a wing tank and, like a wounded bird, this is where she landed, not to return on this day, or any other day.
dobber is offline  
Old 09-06-08, 06:08 AM
  #10  
Senior Member
 
Join Date: May 2007
Location: Pennsylvania
Posts: 1,946

Bikes: Pedal Force RS2, Canyon, Basso, Tommaso, Rock Racing, Schwinn, SWOBO, Trek

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Liked 1 Time in 1 Post
Carbon Fiber failure is catospheric if it happens. It does not go into flex, stress, or bend mode prior to failure. It goes directly to severe strain break. A micro-second time span. It is not a malluable material which gives slightly like metals.

I have a full carbon fiber road bike and a 50/50 one (main tri is Aluminum, rest CF) and I check my seat tube on a regular basis.
ThinLine is offline  
Old 09-06-08, 12:11 PM
  #11  
Senior Member
 
capwater's Avatar
 
Join Date: Dec 2004
Location: Quahog, RI
Posts: 1,509

Bikes: Giant TCR Comps, Cdale R5000, Klein Q-Pro, Litespeed Siena, Piasano 105, Redline Conquest Pro, Voodoo Bizango, Fuji Aloha

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Those older CF frames are lugged. Sometimes with age the tubes become unglued from the aluminum lug. If all is tight ride on.
capwater is offline  
Old 09-06-08, 12:43 PM
  #12  
Senior Member
 
Oldpeddaller's Avatar
 
Join Date: Apr 2008
Location: Maidstone, Kent, England
Posts: 2,637

Bikes: 1970 Holdsworth Mistral, Vitus 979, Colnago Primavera, Corratec Hydracarbon, Massi MegaTeam, 1935 Claud Butler Super Velo, Carrera Virtuoso, Viner, 1953 Claud Butler Silver Jubilee, 1954 Holdsworth Typhoon, 1966 Claud Butler Olympic Road, 1982 Claud

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Liked 11 Times in 10 Posts
"I'm riding an almost 20 yo aluminum frame with bonded joints. I tip the scales at about 240#. Am I scared of imminent failure? No."

Me too. Is yours a Vitus or Alan?

My Vitus 979 (Silver Wedding Anniversary present from my wife - it's slver coloured - bless her!)

- Is the lightest thing I've ever ridden - 16lbs dead, including pedals, bottle & cage and computer - with a full Chorus 9 speed gruppo, SLK carbon saddle and Arayo clincher rims - what a machine!
Oldpeddaller is offline  
Old 09-06-08, 01:09 PM
  #13  
Making a kilometer blurry
 
waterrockets's Avatar
 
Join Date: May 2006
Location: Austin (near TX)
Posts: 26,170

Bikes: rkwaki's porn collection

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 37 Post(s)
Liked 91 Times in 38 Posts
Originally Posted by capwater
Those older CF frames are lugged. Sometimes with age the tubes become unglued from the aluminum lug. If all is tight ride on.
Yep, the failure will be at the lugs.
waterrockets is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.