FS swap brake issues
#1
Junior Member
Thread Starter
Join Date: Aug 2005
Posts: 5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
FS swap brake issues
I have a mid-90's peugeot non-suspension MTB and I recently put a used FS front fork on it. The bike has the original Shimano STI Push-Push style low Leverage V-brake levers on it. The fork has the newer style V-brake set up on it. After the swap, I have almost no leverage or pressure on my front brake . Is there a different kind of brake lever setup that can fix this?
#2
Junior Member
Thread Starter
Join Date: Aug 2005
Posts: 5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I guess that i was a little lacking in proper terminology on my post. The bike has Canti brakes and the suspension fork has V brake. How do I get decent braking on the V brake. Do I need to change lever stups or is there some other solution.
#3
Bicycle Repair Man !!!
Canti levers and v brake levers have differing amounts of pull... you should run v brake levers with the v brakes.