Not changing into gear
02-19-09, 11:26 PM
#1
Senior Member
Thread Starter
Join Date: Oct 2008
Posts: 53
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Not changing into gear
Hi there guys, i have a 12 speed nikishi custom sport. i recently changed the shifter cables, but now i am not able to get it back down to the highest gear/smallest sprocket on back tire assemply (sorry if i have it around, but in new, hope you guys understand what i mean)
what is the proper method of installing new cables, i searched on line but i cant get a definite answer
what is the proper method of installing new cables, i searched on line but i cant get a definite answer
02-20-09, 01:03 AM
#2
Really Old Senior Member
You have too much cable tension.
Loosen the clamp screw, turn the cranks so the chain goes to the smallest cog.
Then pull the slack out of the cable and tighten the clamp.
Loosen the clamp screw, turn the cranks so the chain goes to the smallest cog.
Then pull the slack out of the cable and tighten the clamp.
02-20-09, 03:22 AM
#3
Formerly Known as Newbie
Join Date: Mar 2002
Location: Helsinki, Finland
Posts: 6,249
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 4 Times
in
3 Posts
__________________
To err is human. To moo is bovine.
Who is this General Failure anyway, and why is he reading my drive?
Become a Registered Member in Bike Forums
Community guidelines
To err is human. To moo is bovine.
Who is this General Failure anyway, and why is he reading my drive?
Become a Registered Member in Bike Forums
Community guidelines
