oil or grease for sqeaky jockey wheels?
#1
Senior Member
Thread Starter
Join Date: Apr 2006
Posts: 252
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
oil or grease for sqeaky jockey wheels?
Oh, I meant "squeaky", with a 'u'.
Damn uneditable titles
I gave my rear derailleur a thorough clean, and now, a few weeks later, the wheels are squeaky
Damn uneditable titles
I gave my rear derailleur a thorough clean, and now, a few weeks later, the wheels are squeaky
#2
I have senior moments...
Join Date: Oct 2008
Location: Woodside, CA
Posts: 2,151
Bikes: Many
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Doesn't matter a great deal, if I were to take it apart I'd use a light grease, if applying externally I'd use my chain lube.
#4
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,503
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7348 Post(s)
Liked 2,470 Times
in
1,435 Posts
I betcha the jockey wheels aren't really squeaking but rather the chain. You hear the sound there, because the chain bends the most there.
But it doesn't hurt to oil the jockey wheels while you're at it.
But it doesn't hurt to oil the jockey wheels while you're at it.
#5
Senior Member
Thread Starter
Join Date: Apr 2006
Posts: 252
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I gave the wheels a good oiling with the derailleur sitting flat on a bench (I was swapping all the parts from one frame to another), then put it on the bike, but it still squeaked -- then I noticed the chain was dry
Last edited by Disco Stu; 02-25-09 at 10:17 PM.
#6
Your mom
Join Date: Aug 2006
Posts: 2,544
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I've definitely had squeaky jockey wheels before; treatment depends on how motivated I am. Motivated = disassemble and grease, as I have some vague feeling that it would last longer. Unmotivated = squirt of oil.
#7
Perineal Pressurized
Join Date: Oct 2003
Location: In Ebritated
Posts: 6,555
Mentioned: 0 Post(s)
Tagged: 1 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
I usually disassemble and grease them during my routine maintenance.
__________________
This is Africa, 1943. War spits out its violence overhead and the sandy graveyard swallows it up. Her name is King Nine, B-25, medium bomber, Twelfth Air Force. On a hot, still morning she took off from Tunisia to bomb the southern tip of Italy. An errant piece of flak tore a hole in a wing tank and, like a wounded bird, this is where she landed, not to return on this day, or any other day.
This is Africa, 1943. War spits out its violence overhead and the sandy graveyard swallows it up. Her name is King Nine, B-25, medium bomber, Twelfth Air Force. On a hot, still morning she took off from Tunisia to bomb the southern tip of Italy. An errant piece of flak tore a hole in a wing tank and, like a wounded bird, this is where she landed, not to return on this day, or any other day.
#9
Senior Member
Oil or any decent spray lube is the way to go. I've used a RD for 5 years and never had the jockey wheel apart. I give mine a squirt of lube every couple of weeks.
#10
)) <> ((
it will take you 10 seconds to remove each wheel. 2-3 minutes to open them up, remove the grease, and put new grease back in. less than 10 minutes of your time to eliminate one variable. why not?
#11
just ride
Join Date: Nov 2007
Location: Philadelphia
Posts: 375
Bikes: specialized roubaix, dawes sst ( steel single speed)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Liked 0 Times
in
0 Posts
I would try some type of heavy oil. Greased my campagnolo 8 speed jockey wheels, and it worked its way out and gunked up the whole chain.
#14
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,503
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7348 Post(s)
Liked 2,470 Times
in
1,435 Posts
Either way you decide between oil and grease, I don't think it matters much.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#15
Spin Forest! Spin!
Join Date: Sep 2007
Location: Arrid Zone-a
Posts: 5,956
Bikes: I used to have many. And I Will again.
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 11 Times
in
10 Posts
Depends on the jockey wheels.....
if they are sealed bearing, clean and light oil them.
if they are bushing, grease them, you don't need to use a lot.
if they are sealed bearing, clean and light oil them.
if they are bushing, grease them, you don't need to use a lot.
#16
Senior Member
Thread Starter
Join Date: Apr 2006
Posts: 252
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#17
Spin Forest! Spin!
Join Date: Sep 2007
Location: Arrid Zone-a
Posts: 5,956
Bikes: I used to have many. And I Will again.
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 11 Times
in
10 Posts
That should have both....a Centeron pulley for jockey and a sealed bearing pulley as tension pulley.
A Centeron is just a bushing with a couple mm of lateral play.
The sealed bearing pulley should have no play. You should see a small cartridge bearing. In most cases, it's maintenance free. If the RD has been submerged in water and mud, I'd opt to overhaul it and attempt to inject synthetic motor oil pass the rubber lip seals.
A Centeron is just a bushing with a couple mm of lateral play.
The sealed bearing pulley should have no play. You should see a small cartridge bearing. In most cases, it's maintenance free. If the RD has been submerged in water and mud, I'd opt to overhaul it and attempt to inject synthetic motor oil pass the rubber lip seals.