Rear Derailleur compatability question
#1
Senior Member
Thread Starter
Join Date: Sep 2008
Location: NE Tennessee
Posts: 917
Bikes: Giant TCR/Surly Karate Monkey/Foundry FireTower/Curtlo Tandem
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 169 Post(s)
Liked 84 Times
in
62 Posts
Rear Derailleur compatability question
When I started riding last summer I picked up Schwinn Circuit 24 speed. Eventually I will pick up a better bike, but this frame is good enough for now and I really can't justify the expense of a new bike at the moment. I know that can't make a silk purse out of a sows ear, but there are some improvements that I'd like to make. Primarily, the rear derailleur is a Shimano RD2200 and has been getting a little sloppy. I keep it adjusted and it shifts decently but I would like to pick up a different derailleur and swap it out with something a little better.
I have a triple in the front so I know that I need a long cage.
I also know that the width of chains for 9 and 10 sprocket cassettes are narrower than what I have with the 8 sprocket that is currently on my bike but I don't know if that will present any problems.
Any recommendations or suggestions?
I have a triple in the front so I know that I need a long cage.
I also know that the width of chains for 9 and 10 sprocket cassettes are narrower than what I have with the 8 sprocket that is currently on my bike but I don't know if that will present any problems.
Any recommendations or suggestions?
#2
Senior Member
Join Date: Apr 2006
Posts: 3,653
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 380 Post(s)
Likes: 0
Liked 106 Times
in
80 Posts
I would ride what what you have until it breaks if it was my bike. On the other hand you have money burning a hole in your pocket replace it with a long cage 105 or Ultegra. Roger
#3
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
I know a "9-speed" Ultegra rear derailleur works fine with a 7/8-speed chain as I had that combination on one bike for quite a while so a 9-speed 105 should work as well. I don't know if the 10-speed road derailleurs will work or if the cage and pulleys are narrower enough to give problems.
One option is a MTB rear derailleur as these are all 9-speed, almost all long cage, and a Deore LX or XT are good components at reasonable cost.
One option is a MTB rear derailleur as these are all 9-speed, almost all long cage, and a Deore LX or XT are good components at reasonable cost.
#4
Great State of Varmint
Join Date: Sep 2008
Location: Dante's Third Ring
Posts: 7,476
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 15 Times
in
15 Posts
If you'd like a Shimano Ultegra, but $80 - $100 is too steep:
https://www.cambriabike.com/shopexd.a...EAR+DERAILLEUR
No joke - these are brand new and shift flawlessly. I bought 3. So far.
https://www.cambriabike.com/shopexd.a...EAR+DERAILLEUR
No joke - these are brand new and shift flawlessly. I bought 3. So far.
#5
STFD
Join Date: Jul 2008
Location: North Bergen, NJ
Posts: 778
Bikes: '80 Windsor Carrera Sport, '02 Specialized Sirrus A1, '10 Giant Escape 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
How about a Nashbar-brand rear derailleur? $37 or something. I have no experience with it, personally, but it looks like a bargain, at that price.
Anyone tried one?
Anyone tried one?
#6
he said member
Join Date: Sep 2008
Location: is everything
Posts: 13,802
Bikes: yes please
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 2789 Post(s)
Liked 1,951 Times
in
1,207 Posts
If you'd like a Shimano Ultegra, but $80 - $100 is too steep:
https://www.cambriabike.com/shopexd.a...EAR+DERAILLEUR
No joke - these are brand new and shift flawlessly. I bought 3. So far.
https://www.cambriabike.com/shopexd.a...EAR+DERAILLEUR
No joke - these are brand new and shift flawlessly. I bought 3. So far.
#7
Senior Member
The rear der. won't make that much difference. If the cables are in good shape you would have better luck changing out the shifters.
#8
Senior Member
Join Date: Feb 2005
Location: Oklahoma
Posts: 9,438
Bikes: Trek 5500, Colnago C-50
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 7 Times
in
6 Posts
A lot of shifting problems get blamed on the derailleurs when the problem is more often the shifters or the cables and cable housings. I think derailleurs are usually the most dependable and longest lasting part of the drivetrain.