Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

threadless stem adapter question

Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

threadless stem adapter question

Old 04-19-09, 12:02 PM
  #1  
Senior Member
Thread Starter
 
ScottNotBombs's Avatar
 
Join Date: Mar 2008
Location: Joliet, IL
Posts: 405
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
threadless stem adapter question

I have a specialized stem and fsa bars that I got practically for free that I want to put on a bike with a quill stem. The way I was thinking about doing it is not even using the locknut and just putting on the threaded top race, a spacer that will cover the threads and then the adapter with the stem on it to hold the spacer in place and keep the threaded race from backing off. I just think it will make the bike look cleaner, but is it a bad idea, or will I look like an idiot? lol.
I can take a picture if I didnt explain it well enough.
ScottNotBombs is offline  
Old 04-19-09, 12:13 PM
  #2  
747 Freight Pilot
 
bicycleflyer's Avatar
 
Join Date: Aug 2008
Location: Ohio, USA
Posts: 458

Bikes: Rivendell, Bike-Friday Pocket-Rocket and one home made fixed gear

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
You have a threaded headset and you want to use a threadless stem.. Have I got that right?

Is this the adapter you are talking about?

https://www.performancebike.com/shop/...tegory_ID=5230

If so, I would highly recommend you use the locknut. Just use the adapter as it was meant to be used and mount your stem accordingly. I had one of these adapters on an older bike and it looked clean to me. Remember... Function takes priority over form.
bicycleflyer is offline  
Old 04-19-09, 12:17 PM
  #3  
AEO
Senior Member
 
AEO's Avatar
 
Join Date: Jun 2007
Location: A Coffin Called Earth. or Toronto, ON
Posts: 12,258

Bikes: Bianchi, Miyata, Dahon, Rossin

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 5 Times in 5 Posts
bad idea.

you need at least 2 screws binding into each other to make them hold their position on a moving axis.

your idea will just result in a loose headset that will, at best make you lose a bearing, at worst result in a bent frame or fork.
__________________
Food for thought: if you aren't dead by 2050, you and your entire family will be within a few years from starvation. Now that is a cruel gift to leave for your offspring. ;)
https://sanfrancisco.ibtimes.com/arti...ger-photos.htm
AEO is offline  
Old 04-19-09, 12:20 PM
  #4  
Senior Member
 
Join Date: May 2006
Posts: 178
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time in 1 Post
It seems dangerous to me (if I understood correctly).

Also, I think that it will be very difficult to adjust the preload of the bearings that way (by tightening the quill stem screw).
Seb71 is offline  
Old 04-19-09, 12:21 PM
  #5  
Newbie
 
Join Date: Aug 2007
Posts: 3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
If you fancy the idea of having a wobbling fork and loose headset, feel free. The locknut (I'm assuming you mean the locking headset ring that follows the threaded race) is the element that holds the race when rotational force is applied. The threadless top cap/star-nut assembly is what applies clamping force to the threadless assembly, within which the stem is sandwiched.
This said, there is a threaded-to-threadless adaptor commercially available for just such an occasion. Make sure of the stem's clamp diameter as well.
cravateur is offline  
Old 04-19-09, 12:40 PM
  #6  
Riding like its 1990
 
thenomad's Avatar
 
Join Date: Nov 2006
Location: IE, SoCal
Posts: 3,789
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Liked 8 Times in 8 Posts
Just buy a quill adaptor, mount the stem on it and call it a day.
Reality = Hardly anyone but you cares what your bike looks like.

I just did this to my bike, but the stem is too long. I have a shorter quill that I think I'll use and just "let it be what it is" instead of buying more stuff. But yes, it sort of looks different and more modern and you don't have to rewrap the handlebars everytime you want to change stems, but then again, once you have the right fit, you don't need to change anything else.
thenomad is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.