Downtube shifter adapter for Cannondale
#1
Senior Member
Thread Starter
Join Date: Apr 2009
Posts: 61
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Downtube shifter adapter for Cannondale
Somewhere between the break-down and build-up of my Cannondale, one of the plastic adapters that connects the shifter to the down tube broke (the right one, and the little cone that sticks into the smaller of the two holes on frame, if it helps). I re-did all the cable but I'm skipping gears now because I'm not getting proper friction.
I'm not really sure what to do here. Anyone got any suggestions?
I'm not really sure what to do here. Anyone got any suggestions?
#2
Senior Member
You can get a replacement piece, if you are talking about what I think you are. Photos help.
#4
Senior Member
Thread Starter
Join Date: Apr 2009
Posts: 61
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Got 'em
Hey all. Yep, headed down to the LBS and they had the piece...thank GAWD, thought I was going to have to get a new set of shifters. Turned out to be a $1part. Thanks for the help