got thiiiiis close to buying a spoke wrench today
#1
Senior Member
Thread Starter
Join Date: Jul 2008
Location: 25 miles northwest of Boston
Posts: 29,545
Bikes: Bottecchia Sprint, GT Timberline 29r, Marin Muirwoods 29er, Trek FX Alpha 7.0
Mentioned: 112 Post(s)
Tagged: 0 Thread(s)
Quoted: 5222 Post(s)
Liked 3,575 Times
in
2,339 Posts
got thiiiiis close to buying a spoke wrench today
I saw a spoke wrench at REI during lunch today and was about to purchase it saw that they had 2, a green one and a red one. Each with a different measurement listed on the package. Visually they looked very similar.
I have mostly old 10-speed bikes with 27" wheels but also now a 700c bike.
Can someone clue me in about what sixe (or color) I require? THANKS!
I have mostly old 10-speed bikes with 27" wheels but also now a 700c bike.
Can someone clue me in about what sixe (or color) I require? THANKS!
#2
Senior Member
Join Date: May 2009
Location: Raleigh, NC
Posts: 70
Bikes: Peugeot PX10e, Specialized Allez Epic
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Buy the circular ones that have all the usual nipple sizes. They are found in almost any good bike store and will not break the bank ...
#3
Senior Member
Join Date: May 2009
Location: pacific beach, ca
Posts: 97
Bikes: giant defy 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
well worth the money. I picked one up yesterday and trued my wheels today took all of about a 1/2 hour but it's dead on now =)
#4
Senior Member
Thread Starter
Join Date: Jul 2008
Location: 25 miles northwest of Boston
Posts: 29,545
Bikes: Bottecchia Sprint, GT Timberline 29r, Marin Muirwoods 29er, Trek FX Alpha 7.0
Mentioned: 112 Post(s)
Tagged: 0 Thread(s)
Quoted: 5222 Post(s)
Liked 3,575 Times
in
2,339 Posts
point me toward an inexpensive rack for truing a wheel?
#6
Senior Member
Join Date: May 2007
Location: SW Idaho
Posts: 643
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#7
Senior Member
Thread Starter
Join Date: Jul 2008
Location: 25 miles northwest of Boston
Posts: 29,545
Bikes: Bottecchia Sprint, GT Timberline 29r, Marin Muirwoods 29er, Trek FX Alpha 7.0
Mentioned: 112 Post(s)
Tagged: 0 Thread(s)
Quoted: 5222 Post(s)
Liked 3,575 Times
in
2,339 Posts
LOL, OK that's cheap! :-)
I saw a guy do some new wheels I bought - he checked them and adjusted them before I ran off with them. It was a nice setup with calipers and as he trued them he moved the calipers progressively inward. It seemed like the right way to do it.
I know "inexpensive" is a relative term. I figure anything that is not high-end would be affordable. Maybe not.
I saw a guy do some new wheels I bought - he checked them and adjusted them before I ran off with them. It was a nice setup with calipers and as he trued them he moved the calipers progressively inward. It seemed like the right way to do it.
I know "inexpensive" is a relative term. I figure anything that is not high-end would be affordable. Maybe not.
#8
Senior Member
For a spoke wrench, most newer wheels will use the black Park Tool spoke wrench. My Dad's Trek 7300FX has WTB wheels that use the red spoke wrench though and the department store bikes that I've worked on have also used the red wrench. I own the green one but have never needed it. I prefer seperate wrenches as there is no chance of mistakenly using the wrong size like you could on a multi-size wrench. With seperate wrenches, I find the one that fits best and then keep only that one by my side.
#10
Senior Member
Personally I would go with the newer Park Tool wrenches that grip the nipple on all four sides. The circular ones with multiple slots only hold the nipple on two sides and they aren't manufactured very precisely either. You'll end up rounding off spoke-nipples with those and will wished you bought the Park Tool model.
Use some calipers to measure what size nipples you have and buy the proper wrench.
Use some calipers to measure what size nipples you have and buy the proper wrench.
#11
Pwnerer
Don't bother buying cheap spoke wrenches: you'll spend the few bucks saved on stripped nipples and frustration.
If they're Park wrenches, they make two different styles, the SW-2 and the SW-42 in Red and the SW-0 and SW-40 in Black, the two most common sizes. My advice: Buy them both.
The SW-4X is a four-sided wrench that gives much better nipple engagement to prevent stripping. Here's the difference:
The SW-4X also has a bit more cushion which is appreciated.
I'd recommend buying quality spoke wrenches, but as previously stated, almost any truing jig will suffice. I would also recommend the Minoura. I have a heavier duty shop jig, but I still use the Minoura for mobile work since it folds down compactly for travel.
If they're Park wrenches, they make two different styles, the SW-2 and the SW-42 in Red and the SW-0 and SW-40 in Black, the two most common sizes. My advice: Buy them both.
The SW-4X is a four-sided wrench that gives much better nipple engagement to prevent stripping. Here's the difference:
The SW-4X also has a bit more cushion which is appreciated.
I'd recommend buying quality spoke wrenches, but as previously stated, almost any truing jig will suffice. I would also recommend the Minoura. I have a heavier duty shop jig, but I still use the Minoura for mobile work since it folds down compactly for travel.