Advertise on Bikeforums.net



User Tag List

Results 1 to 3 of 3

Thread: Cable routing

  1. #1
    .
    Join Date
    May 2006
    Location
    Hillsboro, Oregon
    My Bikes
    2013 Soma ES, 89 Trek 950
    Posts
    3,638
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Cable routing

    Hello,

    I'm turning an old '87 Bianchi Grizzly into a road type bike. Switching the brakes to dual pivot. Front brake is no problem. The rear has a little small issue. The cable. Any ideas on how I can route the cable? It originally came with a U Brake mounted under the chain stay. This is also where the cable bosses are and there are none on the top tube.

    Thank you for any advice.
    Demented internet tail wagging imbicile.

  2. #2
    Senior Member
    Join Date
    Oct 2005
    Posts
    1,735
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Something like these?

    Loose Screws 1 1/8
    Loose Screws 1 1/4

    I think these are stops but you could buy 2 and run a bare cable along the top tube and housing at either end

  3. #3
    .
    Join Date
    May 2006
    Location
    Hillsboro, Oregon
    My Bikes
    2013 Soma ES, 89 Trek 950
    Posts
    3,638
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    That might just work.
    Demented internet tail wagging imbicile.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •