Wheel sets
#1
Steel
Thread Starter
Join Date: Aug 2009
Location: Monterey Bay area
Posts: 130
Bikes: Lots! All steel and 1 titanium.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Wheel sets
I have a question on quality. I have two sets of complete wheels.
The first set: Araya rims RS 430 700c
Exage hubs FH HG50 on the back and HB RM50 in front
Needs a few spokes replaced and truing
Off of a 1994 Bridgestone RB-2
The second set: Mavic MA 40 rim in back and Araya CH 370 in front
both have Shimano Ultegra 600 hubs
True. Needs new tires
Off of a 1991-2 Bianchi Limited
I am trying to fugure out which one to put on my Miyata 1000 touring bike. I am still learning the component hierarchy. Which set is beter quality?
Thanks!
The first set: Araya rims RS 430 700c
Exage hubs FH HG50 on the back and HB RM50 in front
Needs a few spokes replaced and truing
Off of a 1994 Bridgestone RB-2
The second set: Mavic MA 40 rim in back and Araya CH 370 in front
both have Shimano Ultegra 600 hubs
True. Needs new tires
Off of a 1991-2 Bianchi Limited
I am trying to fugure out which one to put on my Miyata 1000 touring bike. I am still learning the component hierarchy. Which set is beter quality?
Thanks!
#3
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 27,858
Bikes: Too many to list here check my signature.
Mentioned: 192 Post(s)
Tagged: 2 Thread(s)
Quoted: 2930 Post(s)
Liked 2,923 Times
in
1,491 Posts
Hello. could the frnt wheel from the Bianchi be a ctl-370? if the rear hubs are both 7spd I would use the ultegra hubs for the Main wheelsand the exage hubs for spare wheels.
there was no '91-92 Limited. 89 was last year for the limited for awhile. the 600 equiped bike was the Virata from '90.
there was no '91-92 Limited. 89 was last year for the limited for awhile. the 600 equiped bike was the Virata from '90.
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
#4
Steel
Thread Starter
Join Date: Aug 2009
Location: Monterey Bay area
Posts: 130
Bikes: Lots! All steel and 1 titanium.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Both sets are used. The rims seem to be in good condition and the hubs both seem to be in good working condition too. The exage hubs do have oxidation and the a few of the spokes are bent. The 600 look new. Spoke count is 32 I think. Is that important? Is there a better spoke count for a particular purpose? Thanks!
#5
Steel
Thread Starter
Join Date: Aug 2009
Location: Monterey Bay area
Posts: 130
Bikes: Lots! All steel and 1 titanium.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Hello. could the frnt wheel from the Bianchi be a ctl-370? if the rear hubs are both 7spd I would use the ultegra hubs for the Main wheelsand the exage hubs for spare wheels.
there was no '91-92 Limited. 89 was last year for the limited for awhile. the 600 equiped bike was the Virata from '90.
there was no '91-92 Limited. 89 was last year for the limited for awhile. the 600 equiped bike was the Virata from '90.
Last edited by Ferrite; 09-11-09 at 06:34 PM.