Replacement freehub for Alvio fh mc12?
#1
Senior Member
Thread Starter
Replacement freehub for Alvio fh mc12?
I'm looking for a replacement freehub for the Shimano alvio fh mc12, 7 speed rear.
The only replacement alvio freehub I'm seeing is for the mc18, 8 speed rear.
I'm fine with that freehub if it would fit my hub. Will that freehub fit, or will I have to look for something NOS?
The only replacement alvio freehub I'm seeing is for the mc18, 8 speed rear.
I'm fine with that freehub if it would fit my hub. Will that freehub fit, or will I have to look for something NOS?
#2
cab horn
Join Date: Jun 2004
Location: Toronto
Posts: 28,353
Bikes: 1987 Bianchi Campione
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 42 Post(s)
Likes: 0
Liked 26 Times
in
19 Posts
I'm looking for a replacement freehub for the Shimano alvio fh mc12, 7 speed rear.
The only replacement alvio freehub I'm seeing is for the mc18, 8 speed rear.
I'm fine with that freehub if it would fit my hub. Will that freehub fit, or will I have to look for something NOS?
The only replacement alvio freehub I'm seeing is for the mc18, 8 speed rear.
I'm fine with that freehub if it would fit my hub. Will that freehub fit, or will I have to look for something NOS?
Sometimes you can manipulate the dustcover on the freehub or on the axle set to make it work but sometimes it won't. In other words - don't know. If you can pull up the techdoc for your 7 speed hub/freehub then you can check it against the cone/hardware on that side with this:
https://techdocs.shimano.com/media/te...9830608947.pdf
That might work to determine compatibility.
#3
Senior Member
Thread Starter
It may. The shimano techdoc doesn't list compatibility between models for that freehub body unfortunately. Typically the problem you'll get with trying to interchange freehubs from different speeds/models is that the upper dustcap will be incompatible with the cone/locknut/dust cap on that.
Sometimes you can manipulate the dustcover on the freehub or on the axle set to make it work but sometimes it won't. In other words - don't know. If you can pull up the techdoc for your 7 speed hub/freehub then you can check it against the cone/hardware on that side with this:
https://techdocs.shimano.com/media/te...9830608947.pdf
That might work to determine compatibility.
Sometimes you can manipulate the dustcover on the freehub or on the axle set to make it work but sometimes it won't. In other words - don't know. If you can pull up the techdoc for your 7 speed hub/freehub then you can check it against the cone/hardware on that side with this:
https://techdocs.shimano.com/media/te...9830608947.pdf
That might work to determine compatibility.
So I'm just going by the appearance of part #s 3-10?