Laced a wheel wrong...big problems ahead?
#1
Needs to Ride More
Thread Starter
Join Date: Jan 2008
Location: Long Beach, CA
Posts: 764
Bikes: 1996 Bianchi EL/OS, 1991 Miyata QuickCross
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Laced a wheel wrong...big problems ahead?
Hello, a couple days ago I built, tensioned, and trued a wheel for the first time. I thought I'd followed Sheldon Brown's instructions to a T. I did a simple 3-cross pattern, with a mavic cxp22 rim, dt spokes, and my old shimano 105 hub (32h). I did all this, and when I finally put the wheel on I realized...I'd laced one side differently than the other...I'd apparently laced one side backward, with the leading spoke crossing over the trailing spoke rather than under. It looked just like the example when I first finished, in terms of pattern. It being my first wheelbuild I was somewhat proud of myself for getting it done. Now, being the perfectionist and worrier that I am, will this cause major problems? I needed the bike up and running (it's my do-everything ride) so I put on the tire and went to class. I've ridden it maybe 10 miles so far and it's stayed true. Should I take it apart and relace it?
#2
Passista
Join Date: Jul 2005
Posts: 7,597
Bikes: 1998 Pinarello Asolo, 1992 KHS Montaņa pro, 1980 Raleigh DL-1, IGH Hybrid, IGH Utility
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 866 Post(s)
Liked 721 Times
in
396 Posts
You mean leading (or trailing) spokes are inside on one side of the hub and outside on the other? If that's the case, no problem at all.
#3
Needs to Ride More
Thread Starter
Join Date: Jan 2008
Location: Long Beach, CA
Posts: 764
Bikes: 1996 Bianchi EL/OS, 1991 Miyata QuickCross
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Maybe. What it looks like is that one one side, the leading spoke goes under the third trailing spoke it crosses. On the other side, the leading spoke goes over it.
#4
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 643 Times
in
364 Posts
Asymetrical laceing.
Many factory wheels used to be built that way. Some wheelbuilders still build wheels that way on purpose. Esthetics aside, it's a zero on the things-to-worry-about scale.
Many factory wheels used to be built that way. Some wheelbuilders still build wheels that way on purpose. Esthetics aside, it's a zero on the things-to-worry-about scale.
#5
Junior Member
Join Date: Nov 2009
Location: www.bikecyclingreviews.com
Posts: 7
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Dont worry, should be OK. Wheels acn be built with both sides looking the same from the same side or as a mirror to each side.
Well done by the way!
Well done by the way!
#6
Type 1 Racer
Join Date: Apr 2006
Location: Davis, CA
Posts: 2,579
Bikes: A dozen or so.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts