Order of adjustment - Front/Rear Derailer
#1
Newbie
Thread Starter
Join Date: Mar 2008
Posts: 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Order of adjustment - Front/Rear Derailer
New to the forum:
A couple years ago I purchased a Electra Townie 700C and absolutely love it. I'm never in a hurry and try to ride 15+ miles several times a week to aid in weight reduction. I managed 50 lbs and looking for more. I also ride it to the grocery store a few miles from the house. That said, I want to keep it and the components are wearing out.
I purchased XT components (NOS 760s) and am hoping to swap everything out this weekend as is starting to warm up in Mississippi.
My primary question is that I am replacing both the front, rear derailer and the cassette and don't know what order is best for adjusting them.
My first thought is front - then back, but I honestly don't have a clue.
Any help would be appreciated.
A couple years ago I purchased a Electra Townie 700C and absolutely love it. I'm never in a hurry and try to ride 15+ miles several times a week to aid in weight reduction. I managed 50 lbs and looking for more. I also ride it to the grocery store a few miles from the house. That said, I want to keep it and the components are wearing out.
I purchased XT components (NOS 760s) and am hoping to swap everything out this weekend as is starting to warm up in Mississippi.
My primary question is that I am replacing both the front, rear derailer and the cassette and don't know what order is best for adjusting them.
My first thought is front - then back, but I honestly don't have a clue.
Any help would be appreciated.
#5
Great State of Varmint
Join Date: Sep 2008
Location: Dante's Third Ring
Posts: 7,476
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 15 Times
in
15 Posts
If you have problems with a FD, here is my Copy & Paste for future reference. Feel free to make a copy:
____________________________________________________________________________________________________ ______________
Take the cable off the FD. Now install it from scratch as per Park Tool Repair:
https://www.parktool.com/repair/readhowto.asp?id=75
And BicycleTutor:
https://bicycletutor.com/adjust-front-derailer/
When you have it properly trimmed and are ready for the cable - a new one wouldn't hurt - you want to pull the cable taut - not too tight, taut. Then apply 48 to 60 inch-pounds to the pinch-bolt. Then put it through it's paces.
It's always easier and faster to install a FD from square-one, than it is to make adjustments with it already attached. This tends to fix one thing - while throwing another out of kilter. Start fresh. You'll get it.
Adding an inline barrel-adjuster can solve many problems with the cable coming loose - or being too tight.
____________________________________________________________________________________________________ ______________
Take the cable off the FD. Now install it from scratch as per Park Tool Repair:
https://www.parktool.com/repair/readhowto.asp?id=75
And BicycleTutor:
https://bicycletutor.com/adjust-front-derailer/
When you have it properly trimmed and are ready for the cable - a new one wouldn't hurt - you want to pull the cable taut - not too tight, taut. Then apply 48 to 60 inch-pounds to the pinch-bolt. Then put it through it's paces.
It's always easier and faster to install a FD from square-one, than it is to make adjustments with it already attached. This tends to fix one thing - while throwing another out of kilter. Start fresh. You'll get it.
Adding an inline barrel-adjuster can solve many problems with the cable coming loose - or being too tight.