Converting Dawes Road Bike to Hybrid/Mountain ? HEEEELLLPPP
#1
Re Member
Thread Starter
Join Date: Aug 2004
Location: , Location, Location
Posts: 77
Bikes: little red tricycle
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Liked 0 Times
in
0 Posts
Converting Dawes Road Bike to Hybrid/Mountain ? HEEEELLLPPP
I have a Dawes Super Galaxy bike which is not a "cheap" bike.
I'm thinking that I'd like to have a hybrid/comfort/mountain bike instead, and so I'm wondering if I can somehow CONVERT this bike into one of those ?
Basically, I just want to know if I could just change the handlebars (and attachments) if that would do the trick. I will still ride on the road/pavement, but I think I would like the feel of those upright handlebars instead.
Has anyone out there done this ? Is it do-able ? Expensive ? Will the bike still look "normal", or might it just look silly ?
I realize I would have to also change my brake levers, shifters (currently at the end of the handlebar tubes), and perhaps the neck/stem.
Thanks in advance !
I'm thinking that I'd like to have a hybrid/comfort/mountain bike instead, and so I'm wondering if I can somehow CONVERT this bike into one of those ?
Basically, I just want to know if I could just change the handlebars (and attachments) if that would do the trick. I will still ride on the road/pavement, but I think I would like the feel of those upright handlebars instead.
Has anyone out there done this ? Is it do-able ? Expensive ? Will the bike still look "normal", or might it just look silly ?
I realize I would have to also change my brake levers, shifters (currently at the end of the handlebar tubes), and perhaps the neck/stem.
Thanks in advance !
#2
Senior Member
Join Date: Jan 2004
Posts: 9,428
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Originally Posted by steve212
I have a Dawes Super Galaxy bike which is not a "cheap" bike.
I'm thinking that I'd like to have a hybrid/comfort/mountain bike instead, and so I'm wondering if I can somehow CONVERT this bike into one of those ?
Basically, I just want to know if I could just change the handlebars (and attachments) if that would do the trick. I will still ride on the road/pavement, but I think I would like the feel of those upright handlebars instead.
Has anyone out there done this ? Is it do-able ? Expensive ? Will the bike still look "normal", or might it just look silly ?
I realize I would have to also change my brake levers, shifters (currently at the end of the handlebar tubes), and perhaps the neck/stem.
Thanks in advance !
I'm thinking that I'd like to have a hybrid/comfort/mountain bike instead, and so I'm wondering if I can somehow CONVERT this bike into one of those ?
Basically, I just want to know if I could just change the handlebars (and attachments) if that would do the trick. I will still ride on the road/pavement, but I think I would like the feel of those upright handlebars instead.
Has anyone out there done this ? Is it do-able ? Expensive ? Will the bike still look "normal", or might it just look silly ?
I realize I would have to also change my brake levers, shifters (currently at the end of the handlebar tubes), and perhaps the neck/stem.
Thanks in advance !
#3
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,765
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1384 Post(s)
Liked 1,294 Times
in
819 Posts
If you have barcons, you might be able to put them at the ends of the bars. If you have sufficient frame clearance, you can also substitute somewhat wider tyres. (I run 27x1-3/8" knobbies on my UO-8.)
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
#4
DEADBEEF
Join Date: Aug 2002
Location: Catching his breath alongside a road near Seattle, WA USA
Posts: 12,234
Bikes: 1999 K2 OzM, 2001 Aegis Aro Svelte
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 6 Times
in
4 Posts
It sounds like you have barcons. You may find that it will be cheaper to convert them to thumbshifters rather than buying RapidFire shifters. Check out Paul Components thumbies. Speedgoat has them for $48. Otherwise you will need either the SL-R440 (~$60) or SL-R660 (~$100) shifters. And of course you will need brake levers. You can't use brake levers designed for linear-pull or V-brakes because they pull too much cable. You will need something like the Shimano BL-R440 or Avid FR5 (~$30 from Pricepoint). If you're really looking to go cheap, you might want to check these out. Unless you can find a 26.0mm flat straightbar, you'll also have to replace your stem.
__________________
1999 K2 OzM 2001 Aegis Aro Svelte
"Be liberal in what you accept, and conservative in what you send." -- Jon Postel, RFC1122
1999 K2 OzM 2001 Aegis Aro Svelte
"Be liberal in what you accept, and conservative in what you send." -- Jon Postel, RFC1122
#5
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 642 Times
in
363 Posts
Most drop handlebrs have a larger diameter clamp surface than most road bars. That means that, when you replace the bars, you'll also have to either replace the stem or to use some kind of shim. I'd suggest replacing the stem because you will probably want a shorter one with a little more rise anyway. Besides, it makes for a cleaner conversion.
You will also have to replace the brake levers and shifters. I've had good luck using mountain bike rapid fires with road front derailleurs, but now Shimano has a shifter that's designed to do that. Cable routing going from a road bike to flat handlebar won't be a problem.
If you have road caliper brakes, you will probably be limited to 28mm wide tires. Otherwise you'll have to deflate your tire everytime you want to remove a wheel because it won't squeeze past the brake calipers.
If you do a workmanlike job and are careful with your selection of components, there's no reason why this type of conversion can't look "factory."
You will also have to replace the brake levers and shifters. I've had good luck using mountain bike rapid fires with road front derailleurs, but now Shimano has a shifter that's designed to do that. Cable routing going from a road bike to flat handlebar won't be a problem.
If you have road caliper brakes, you will probably be limited to 28mm wide tires. Otherwise you'll have to deflate your tire everytime you want to remove a wheel because it won't squeeze past the brake calipers.
If you do a workmanlike job and are careful with your selection of components, there's no reason why this type of conversion can't look "factory."
#6
Senior Member
Join Date: Feb 2001
Location: England
Posts: 12,948
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 19 Post(s)
Likes: 0
Liked 7 Times
in
7 Posts
The Galaxy is a touring bike, the UK equivelent to a Trek 520. Some models come with MTB transmission, so flat-bar controls are no problem, but make sure the gear-count is compatible.
It is a do-able conversion, and not unsual amongst older touring club riders.
With drop bars, the usual cruising position is on the top of the brake levers (the tops). The drops are only used rarely, into headwinds. The bars can be repositioned, higher and nearer by swapping the stem. If you find the bike too long, you may just have a badly fitted (too large) frame.
It is a do-able conversion, and not unsual amongst older touring club riders.
With drop bars, the usual cruising position is on the top of the brake levers (the tops). The drops are only used rarely, into headwinds. The bars can be repositioned, higher and nearer by swapping the stem. If you find the bike too long, you may just have a badly fitted (too large) frame.
#7
Senior Member
Join Date: Sep 2001
Location: Montreal
Posts: 6,521
Bikes: Peugeot Hybrid, Minelli Hybrid
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
I would just convert to STI shifters so you can change gear from the hoods. Move the bars back and up if you want a more upright position. You wont have to use the drops but it will be nice to have them, when you are facing a strong headwind.
#8
Re Member
Thread Starter
Join Date: Aug 2004
Location: , Location, Location
Posts: 77
Bikes: little red tricycle
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Liked 0 Times
in
0 Posts
Thank you all for your informative responses.
I've since decided that: 1) I'm going to stick with the drop handlebars, and 2) I'm going to sell my Dawes. I've already posted it on eBay, in case anyone is interested !
I've since decided that: 1) I'm going to stick with the drop handlebars, and 2) I'm going to sell my Dawes. I've already posted it on eBay, in case anyone is interested !