148mm bb spindle
#1
Membre Québécois
Thread Starter
Join Date: Jun 2008
Location: montreal, Quebec
Posts: 215
Bikes: shwinn mountain bike,nakamura touring bike,and some others
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
148mm bb spindle
i just need to know if a 148mm bb spindle isliterally too long to work on a (1991 ccm mtb frame) ashtabula crank conversion!
#2
Senior member
Join Date: Oct 2004
Location: Oakville Ontario
Posts: 8,117
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 943 Post(s)
Liked 658 Times
in
371 Posts
Edit: Just occurred to me you may have meant a cottered spindle. Those are longer because they extend all the way through the cranks.
Last edited by Dan Burkhart; 01-26-10 at 07:10 PM.
#3
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
It's also possible it's a nutted spindle and you are measuring to the extreme ends of the threaded sections at each end of the spindle. Spindle lengths are specified by the overall length to the ends of the tapers.
Bolted spindles are easy since the end of the taper is the end of the spindle. Nutted spindles are much longer overall but the length shouldn't include the threaded ends.
Bolted spindles are easy since the end of the taper is the end of the spindle. Nutted spindles are much longer overall but the length shouldn't include the threaded ends.
#4
Senior Member
Also, BBs spindle lengths are determined by the crankset, not the frame.
#5
Membre Québécois
Thread Starter
Join Date: Jun 2008
Location: montreal, Quebec
Posts: 215
Bikes: shwinn mountain bike,nakamura touring bike,and some others
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
nutted spindle so it will be as you say smaller
the crankset is an el cheapo no brand thing but hey its worth it just for the pedals i can install unlike on the 1 piece crank
i think im going to try this thing out ,cant really be that bad to try it for a little 12$
the crankset is an el cheapo no brand thing but hey its worth it just for the pedals i can install unlike on the 1 piece crank
i think im going to try this thing out ,cant really be that bad to try it for a little 12$
Thread
Thread Starter
Forum
Replies
Last Post
Velocirapture
Track Cycling: Velodrome Racing and Training Area
5
07-06-13 09:47 PM