Question about putting adjustable gears on a single speed 80's Peugeot
#1
Newbie
Thread Starter
Join Date: Jul 2009
Posts: 4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Question about putting adjustable gears on a single speed 80's Peugeot
Well I have a 80's Peugeot that I converted to a single speed bike to ride around where I live. I have really enjoyed riding the bike and would like to take it for further rides and ride with friends that have those fancy carbon fiber bicycles on more hilly terrain. I am wondering if there is a kit or a way to convert my single speed bike into a bike with 3, 5, etc rear gears. I really like the setup I have now but it sucks going up hills and when I am on even roads I know I could handle a much steeper gear ratio to get more speed. Please let me know if there is anything I can do.
Thanks!
Here is a picture of my bike. It was a wreck when I found it and had mountain bike handle bars/brake levers among many other horrible things.
Thanks!
Here is a picture of my bike. It was a wreck when I found it and had mountain bike handle bars/brake levers among many other horrible things.
#2
Senior Member
Join Date: Sep 2007
Location: Vancouver
Posts: 1,438
Bikes: NOYB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Am I the only laughing at the idea of a "kit" to unconvert a bike from a homemade single speed?
Put a rear derailleur on that hanger, a cassette on that rear wheel, and a new/longer chain on. A downtube shifter to match the rear derailleur with a cable and some housing will make it work. It will be more than 3 or 5 speeds, but I think you can deal with that. What cassette is your rear hub designed to handle?
Put a rear derailleur on that hanger, a cassette on that rear wheel, and a new/longer chain on. A downtube shifter to match the rear derailleur with a cable and some housing will make it work. It will be more than 3 or 5 speeds, but I think you can deal with that. What cassette is your rear hub designed to handle?
#3
Senior Member
Join Date: Mar 2008
Posts: 8,688
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1074 Post(s)
Liked 295 Times
in
222 Posts
Well, for the least amount of style impact you can get a wheel with an internally geared hub and chuck it in there. I've even seen one wannabee SS rider do a stealth assembly and hide the shifter away up under the saddle....
Anything else and you're looking at a lengthy shopping list - unless you've got the old bits around and if they can be resurrected. If you haven't you're probably better off buying another bike, either as a donor or to use as it is.
Anything else and you're looking at a lengthy shopping list - unless you've got the old bits around and if they can be resurrected. If you haven't you're probably better off buying another bike, either as a donor or to use as it is.
#4
Newbie
Thread Starter
Join Date: Jul 2009
Posts: 4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Am I the only laughing at the idea of a "kit" to unconvert a bike from a homemade single speed?
Put a rear derailleur on that hanger, a cassette on that rear wheel, and a new/longer chain on. A downtube shifter to match the rear derailleur with a cable and some housing will make it work. It will be more than 3 or 5 speeds, but I think you can deal with that. What cassette is your rear hub designed to handle?
Put a rear derailleur on that hanger, a cassette on that rear wheel, and a new/longer chain on. A downtube shifter to match the rear derailleur with a cable and some housing will make it work. It will be more than 3 or 5 speeds, but I think you can deal with that. What cassette is your rear hub designed to handle?
Yea I do not know bike parts very well. I have a friend who is a bike mechanic who built my bike, I just told him what I wanted. That sounds exactly what I was thinking was possible. I only saw 7 or 10 speed cassettes online. I am pretty sure the bike had a 7 speed cassette with the factory wheel. The derailleur was all screwed up so all of that is gone.
#5
Newbie
Thread Starter
Join Date: Jul 2009
Posts: 4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Well, for the least amount of style impact you can get a wheel with an internally geared hub and chuck it in there. I've even seen one wannabee SS rider do a stealth assembly and hide the shifter away up under the saddle....
Anything else and you're looking at a lengthy shopping list - unless you've got the old bits around and if they can be resurrected. If you haven't you're probably better off buying another bike, either as a donor or to use as it is.
Anything else and you're looking at a lengthy shopping list - unless you've got the old bits around and if they can be resurrected. If you haven't you're probably better off buying another bike, either as a donor or to use as it is.
#6
Senior Member
I'd suggest selling your single speed bike as-is through Craiglist (if you were in Philly, you could easily get $300 for that bike) and buying a geared bike as a replacement. You'll end up with something quite nice even if you don't put all of the money made on your single speed sale towards the geared bike. Unless you have some sort of emotional connection to that frame, selling it will be cheaper than converting it. If you have a mechanic friend, you could always buy a geared bike and swap the necessary components over to your current frame then sell the remains of the geared bike.
#7
Cat 6
Join Date: Dec 2007
Location: Mountain Brook, AL
Posts: 7,519
Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 500 Post(s)
Liked 183 Times
in
118 Posts
7+ speed IGH hubs are wider than your rear dropouts. I'd still probably look for a donor bike for the shifting bits, or just another bike. That way you'll be starting your bike collection.
__________________
72 Frejus (for sale), Holdsworth Record (for sale), special CNC & Gitane Interclub / 74 Italvega NR (for sale) / c80 French / 82 Raleigh Intl MkII f&f (for sale)/ 83 Trek 620 (for sale)/ 84 Bruce Gordon Chinook (for sale)/ 85 Ron Cooper / 87 Centurion IM MV (for sale) / 03 Casati Dardo / 08 BF IRO / 09 Dogma FPX / 09 Giant TCX0 / 10 Vassago Fisticuff
72 Frejus (for sale), Holdsworth Record (for sale), special CNC & Gitane Interclub / 74 Italvega NR (for sale) / c80 French / 82 Raleigh Intl MkII f&f (for sale)/ 83 Trek 620 (for sale)/ 84 Bruce Gordon Chinook (for sale)/ 85 Ron Cooper / 87 Centurion IM MV (for sale) / 03 Casati Dardo / 08 BF IRO / 09 Dogma FPX / 09 Giant TCX0 / 10 Vassago Fisticuff
#8
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,095 Times
in
741 Posts
Basically your frend built "just what you asked for but not what you wanted". You have discovered the limitations of a single speed/fixed gear bike and that is they only have ONE gear.
I agree with the other posters and consider you have three choices:
1. Spend more than it's worth and convert it back to a derailleur bike or fit an internal geared hub.
2. Buy a properly geared new or used bike for your group rides and sell your current bike or keep it as a beater or casual ride.
3. Keep what you have and accept its limitations.
I agree with the other posters and consider you have three choices:
1. Spend more than it's worth and convert it back to a derailleur bike or fit an internal geared hub.
2. Buy a properly geared new or used bike for your group rides and sell your current bike or keep it as a beater or casual ride.
3. Keep what you have and accept its limitations.
#9
Senior Member
Join Date: Jun 2007
Location: Minneapolis
Posts: 8,101
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 52 Post(s)
Likes: 0
Liked 16 Times
in
12 Posts
Did your friend use the original rear wheel? If so I'd just get these things:
1. 7 speed Shimano freewheel
2. 7 speed (or friction) downtube shifters
3. SIS cable and housing
4. pretty much any SIS compatible shimano derailleur
5. New chain
Stick with the single chain ring for now and only use the rear shifter. Get the stuff off ebay or find a bike shop that sells old used parts for the shifter and derailleur. The freewheel, cable, cable housing, and chain should be new though. A few years ago Nashbar was still selling 7 speed downtube shifters. You could get them for $15 or so.
If you don't care about indexed shifting then you don't need to worry about getting a Shimano freewheel or derailleur. You can use any brand, however Shimano's HG freewheels shift pretty nice. If you do want indexed shifting you should stick with their stuff.
If you can use your current wheel, I bet it could be done for $75 or less.
Are the shifter bosses still on the bike?
Just so you know, modern combined shift and brake levers are going to set you back quite a bit which is why I'm recommending the downtube shifter.
1. 7 speed Shimano freewheel
2. 7 speed (or friction) downtube shifters
3. SIS cable and housing
4. pretty much any SIS compatible shimano derailleur
5. New chain
Stick with the single chain ring for now and only use the rear shifter. Get the stuff off ebay or find a bike shop that sells old used parts for the shifter and derailleur. The freewheel, cable, cable housing, and chain should be new though. A few years ago Nashbar was still selling 7 speed downtube shifters. You could get them for $15 or so.
If you don't care about indexed shifting then you don't need to worry about getting a Shimano freewheel or derailleur. You can use any brand, however Shimano's HG freewheels shift pretty nice. If you do want indexed shifting you should stick with their stuff.
If you can use your current wheel, I bet it could be done for $75 or less.
Are the shifter bosses still on the bike?
Just so you know, modern combined shift and brake levers are going to set you back quite a bit which is why I'm recommending the downtube shifter.
Last edited by tjspiel; 04-20-10 at 08:45 AM.
#11
Newbie
Thread Starter
Join Date: Jul 2009
Posts: 4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Yea I am going to go back to him. I am sure he can figure something out. I was looking online at other bikes and I was looking at the 1000 to 1500 price range. If I was to get 300 for my current bike then I would need to pay an additional 700 at minimum for a nice road bike. I might as well just spend the money on upgrading my current setup. Plus it would be cool rocking an old steel frame bike!!!
When I bought the bike it was in bad shape. I ripped it all apart, sanded it, painted it and brought it to my buddys bike shop. I gave it to him and he put new wheels, tape, brake levers, seat, rear hub, and made it work really good all together.
So I guess I will have him do like you guys suggested. Get all new rear stuff but I do want to get those trick shifter/brake things.
When I bought the bike it was in bad shape. I ripped it all apart, sanded it, painted it and brought it to my buddys bike shop. I gave it to him and he put new wheels, tape, brake levers, seat, rear hub, and made it work really good all together.
So I guess I will have him do like you guys suggested. Get all new rear stuff but I do want to get those trick shifter/brake things.