Bike Forums

Bike Forums (https://www.bikeforums.net/forum.php)
-   Bicycle Mechanics (https://www.bikeforums.net/bicycle-mechanics/)
-   -   1" threaded steerer tube to 1 1/8 headset? (https://www.bikeforums.net/bicycle-mechanics/650918-1-threaded-steerer-tube-1-1-8-headset.html)

coolio 06-02-10 07:19 PM

1" threaded steerer tube to 1 1/8 headset?
 
Hi,
I'm trying to see if I can swap out my front suspension fork for another that I got in a clearance sale.. I don't know much about this, but seem to recall that there was some spacers that were sold to accomodate theis.

Here are the specs from the fork:

tube: 1" threaded
steerer tube length: 150 millmeter, 43 mm threads
fork rake: 20mm

Thanks.

zzyzx_xyzzy 06-02-10 07:43 PM

at minimum you need

(1) 22.2 diameter quill stem, or a quill to threadless converter
(2) headtube reducer (google on this term to buy a pair)
(3) 1 inch threaded headset.

coolio 06-02-10 09:34 PM

Maybe I should have mentioned this (and I don't know if it matters) but the bike is a folding bike. It kinda looks like this except it has a front suspension fork. Here's a video of a similar one, but with suspension:

http://www.youtube.com/watch?v=2aQ_eGRYbg0

The part just above the headset folds so I don't know if I need a special part in addition. Finally, I looked at some part prices and for the 3 above, I'm looking @ $60 minimum. This fork just cost me $25.

zzyzx_xyzzy 06-02-10 10:34 PM

yeah, this kind of mismatch is rarely worth pursuing -- and your folding stem probably attaches by 1 1/8" quill which isn't going to go in the fork anyway. I saw on Downtube's web site they have new 1 1/8" suspension forks for $60.

coolio 06-03-10 08:33 AM

thanks for your patience with me on this, zzyzx. I won't pursue this upgrade.

Yes, I saw that fork on the DT site. Don't want to go that route because that fork is a POS.

What do you think about this one:

http://cgi.ebay.com/ws/eBayISAPI.dll...=263602_263622

do you think that would work?

zzyzx_xyzzy 06-03-10 01:58 PM

You'd have to get a bike shop to cut threads on the steer tube so it will work with your quill stem and threaded headset.

coolio 06-03-10 02:12 PM


Originally Posted by zzyzx_xyzzy (Post 10908109)
You'd have to get a bike shop to cut threads on the steer tube so it will work with your quill stem and threaded headset.

Thanks!

So my only additional expense would be to have the bike shop cut threads on this fork? I don't have to worry about buying any other parts (quill stem, adapters )to fit this DT bike?


All times are GMT -6. The time now is 08:36 AM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.