Adding a granny gear?
I have an '04 P.2 and I want to add a granny gear and a bashguard. Can I just buy the gear and bashguard, or will I have to buy the whole thing (http://pic10.picturetrail.com/VOL326...6/66023746.jpg)? The P.2 comes with the Truvativ Hussefelt crankset, but with just 1 38t chainring. Thanks.
|
Depends on the crankset. If the ring is bolted not rivited to the crank arm you should just be able to undo the bolts and fit a bash guard. As it currently has only one ring the bolts might not be long enough so you may need a longer set.
You will be able to fit a granny if the crankset has the threaded holes for the bolts. Your current chain guide will no doubt not work with two rings so if you need a guide be prepared to replace it with a duel ring version eg e.thirteen drs |
along with your allen key (hex key) you'll also need the chainring bolt tool. It's itty bitty and cheap, but necessary for installing that bash guard. For a granny you don't need it though.
|
Thanks for the help. My crankset doesn't have holes for a granny, so I had to get a new one, along with an e.13 DRS.
|
All times are GMT -6. The time now is 06:30 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.