Advertise on Bikeforums.net



User Tag List

Results 1 to 3 of 3
  1. #1
    Senior Member Thumpic's Avatar
    Join Date
    Dec 2007
    Location
    The Sunny South
    Posts
    1,530
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)

    Rebuilding LOOK pedals....new territory....

    P7210003..JPGP7210002..jpgp7210001..jpgI have never tried to rebuild pedals before.....I know that one of these has lost all the bearings. Are these a fairly standard size? They don't appear to be too complicated. I tried to find a diagram for them but had no luck. Any help/suggestions are welcomed...thanks in advance!!
    Thumpic....

    Green is the new "CHEAP"

  2. #2
    Senior Member Thumpic's Avatar
    Join Date
    Dec 2007
    Location
    The Sunny South
    Posts
    1,530
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    ??
    Thumpic....

    Green is the new "CHEAP"

  3. #3
    Senior Member
    Join Date
    Feb 2009
    Posts
    3,969
    Mentioned
    4 Post(s)
    Tagged
    0 Thread(s)
    Those are moldy oldies. When you open them up check the axle bearing surface for pitting and the internal cups for the same. If they are badly pitted replace the pedals. The balls should be a standard size. Most are English measurements. 1/8,5/32, 3/16 etc.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •